Stock amp

Reply Subscribe

Thread Tools

Search this Thread

Jun 17, 2010 | 07:57 PM

ritchie919

Thread Starter

Teching In

Joined: Sep 2009

Posts: 26

Likes: 0

Stock amp

My 95 firebird has a stock amp would it be hard to take it out? I wanna replace the stock amp with a 4 channel amp to amp the front doors and rear hatch speakers, and a sepreate amp for the sail panel to give it a nice sound to them with out the need for a subwoofer. Is this possible and how hard would it be?

Jun 18, 2010 | 07:19 AM

DAVE00

TECH Fanatic

iTrader: (10)

Joined: Jul 2007

Posts: 1,739

Likes: 2

From: Houston, TX

Quote:

Originally Posted by ritchie919

I just did all of this in my 95' T/A. It all depends upon what system you have as inessence there are two packages on our cars the 6 speaker basic package and the 10 speaker premium package. Get a good 4 channel amp to run the front and sail panel speakers (you won't need the front tweets anymore). If you really wanna keep the rear deck speakers then just do as I did and wire them in as rear speakers to the new HU's rear powered output. For the sub get a good 2 channel or mono amp to run this as well. If you have the 10 speaker system in your car you won't have a stock amp for the speakers as they are run off the stock hu, however GM considers the sail panel speakers to be subs and they do drive these with a small amp behind the passenger sail panel near the arm rest. Just remove the stock amp and wire up the new amp directly to all 4 speakers. You'll love it as it really changes the sound and good luck.

Reply Subscribe