keyless and power window conversion
Thread Starter
Teching In
Joined: Sep 2010
Posts: 9
Likes: 0
From: Round Rock
keyless and power window conversion hey guys i hope im in the right section for this. i tried looking all over it using search but found nothing on this.
i was wondering if anyone knew how or could shed some light on converting my manual windows and locks to power windows and power locks. im no electronics noob or anything but would just like an insight or advice from others that may have done this before or read something about it.
not sure what parts ill need (besides the button switch panels and wires obviously) and a while back i heard im going to need awhole new window track or something to fit the OEM regulators? i hope thats not true. if it comes down to that maybe ill just rip off some doors from a donor car
lol maybe a universal set up for both?
anyways any ideas? or links?
Rina_940731 Amazon Insider, dmc506@yahoo.com is a scam, dont send him money!
i was wondering if anyone knew how or could shed some light on converting my manual windows and locks to power windows and power locks. im no electronics noob or anything but would just like an insight or advice from others that may have done this before or read something about it.
not sure what parts ill need (besides the button switch panels and wires obviously) and a while back i heard im going to need awhole new window track or something to fit the OEM regulators? i hope thats not true. if it comes down to that maybe ill just rip off some doors from a donor car
lol maybe a universal set up for both?anyways any ideas? or links?
Rina_940731 Amazon Insider, dmc506@yahoo.com is a scam, dont send him money!
Last edited by Killacam512; Dec 22, 2021 at 12:58 PM. Reason: as in keyless entry i meant power locks
How much do you want to spend?
To do it and make it look like stock, you'll need:
- New door panels
- Door lock and window controls w/ harnesses
- New door regulator and motor w/ harnesses
- New door lock actuator
- Lots of wire
- Time
- Patience
There are also aftermarket options: http://www.electric-life.com/index.asp
To do it and make it look like stock, you'll need:
- New door panels
- Door lock and window controls w/ harnesses
- New door regulator and motor w/ harnesses
- New door lock actuator
- Lots of wire
- Time
- Patience
There are also aftermarket options: http://www.electric-life.com/index.asp
Thread Starter
Teching In
Joined: Sep 2010
Posts: 9
Likes: 0
From: Round Rock
oh nice thanks! but prob. no more than 3 or 400. ya i knew most of that would need to changed. i wonder if...i could find someone parting out there car and then replace my doors with ones thats already have power locks and window, would work. With a little wiring and module with remote of course.
... Yea... the remote will be a problem. That's a separate deal and integrated with the BCM. Probably better to go aftermarket there. Regardless 3-400 is probably a bit ambitious to get everything in place.
