Trouble with Pioneer replacement
#1
Launching!
Thread Starter
iTrader: (7)
Join Date: Jun 2008
Location: Maryland
Posts: 224
Likes: 0
Received 0 Likes
on
0 Posts
Trouble with Pioneer replacement
Hi, I recently bought a Pioneer DEH-3100UB to replace my stock Monsoon unit. When I have the new HU plugged in, the radio gets power but the display will not turn on. Here are the specifics that I've checked.
All the wires match, except there are four wires I haven't attached:
-Parking light input
-Dash light dimmer
-Steering wheel controls
-Power antenna (plan on attaching that soon)
I've used a multimeter in the harness, and both the battery and the ignition controlled power read just fine, and the Monsoon unit didn't have its Theftlock enabled. Any ideas?
All the wires match, except there are four wires I haven't attached:
-Parking light input
-Dash light dimmer
-Steering wheel controls
-Power antenna (plan on attaching that soon)
I've used a multimeter in the harness, and both the battery and the ignition controlled power read just fine, and the Monsoon unit didn't have its Theftlock enabled. Any ideas?