Distribution block help
06-19-2011, 10:11 AM
#1
Launching!
Thread Starter
iTrader: (5)
Join Date: Jun 2007
Location: Richmond, VA
Posts: 255
Likes: 0
Received 0 Likes
on
0 Posts
Distribution block help First off this is for a battery relocation job, not stereo... With that said...
I'm running a street wires fused distribution block. The guy at the audio store hooked me up with fuses he thinks would be what I need. I have my 1 gauge cable coming up from the battery to the backside of the block... from there I have a 160 amp fuse in the middle, a 80 amp fuse on one side, and a 60 amp fuse on the other side... Out of the starter, altenator, and fuse panel, which wire needs what fuse?
here's a link to the block im using... It's the FBX0024 model.
http://www.streetwires.com/products/default.aspx?grp=63
I'm running a street wires fused distribution block. The guy at the audio store hooked me up with fuses he thinks would be what I need. I have my 1 gauge cable coming up from the battery to the backside of the block... from there I have a 160 amp fuse in the middle, a 80 amp fuse on one side, and a 60 amp fuse on the other side... Out of the starter, altenator, and fuse panel, which wire needs what fuse?
here's a link to the block im using... It's the FBX0024 model.
http://www.streetwires.com/products/default.aspx?grp=63
