How to wire Led switchback strips
#1
How to wire Led switchback strips
I ordered switchback led strips from eBay.
All three wires look clear.
How to check which wire is for what out of the 3?
What are my options to wire them without having to cut off sockets from stock harness?
I would like to avoid that as much as possible.
TIA
All three wires look clear.
How to check which wire is for what out of the 3?
What are my options to wire them without having to cut off sockets from stock harness?
I would like to avoid that as much as possible.
TIA
#2
And then coat them with Liquid Electrical Tape to seal them up.
although, the nicer ones have female spade connectors built into them to use with insulated male spade connectors:
#4
No , i didn't get a chance to try it out yet or pick up an electronic flasher and scotch locks.
...life of a web devloper.
I didn't get a chance to look at your thread about the switchbacks , did yours get sorted out?
...life of a web devloper.
I didn't get a chance to look at your thread about the switchbacks , did yours get sorted out?