Help installing a Xpresskit module passkey bypass
#4
On The Tree
iTrader: (1)
Join Date: Sep 2009
Location: ma
Posts: 117
Likes: 0
Received 0 Likes
on
0 Posts
No not yet but I'm planning on one soon. That's how I knew the instructions were on thier site.
If your vats is acting up the easiest way to just bypass it would be with resistors or have it tuned out.
If your vats is acting up the easiest way to just bypass it would be with resistors or have it tuned out.
#5
Ungrounded Moderator
iTrader: (4)
VATS can't be tuned out on an f-body. It's controlled by the BCM which is not programmable (as opposed to the PCM which is what tuners work on). You can program the PCM to ignore the missing fuel enable signal from VATS in the BCM but you can't program out the starter relay disable in the BCM. So you're stuck with the resistor method.