power window issue
Thread Starter
TECH Regular
Joined: Apr 2013
Posts: 423
Likes: 0
power window issue last week I had my drivers side window down when I was out for a drive, and when I came home it wouldn't go back up, so I removed the switch plate from the door panel, pushed on the harness and the window went back up. Fast forward to today, I thought the switch might be going out so I ordered some new ones from hawks 3rd generation, and installed them today, the switches seemed to be too big as when I pushed the switch to put the window back up the switch got stuck in the switch plate and when the window got to the top, it made this God awful noise, similar to what the sound of a Firebirds headlight motor going out, like a small jackhammer. I put the old switch back in and tried it and the window lowered about an inch and made that headlight motor noise and then the window would not go up or down. Finally went out, hit the "up" button with one hand grabbed the window with the other and pulled hard and the window went up (big worry was it being down and raining 
) anything I should be on the lookout for to replace? Thanks
) anything I should be on the lookout for to replace? Thanks 
