did an engine swap and trying to figure out electronics!!
Thread Starter
Teching In
Joined: Jan 2011
Posts: 2
Likes: 0
From: Pittsburgh, PA
did an engine swap and trying to figure out electronics!! I did an old school 383 automatic build carb'd and I bought a rolling shell to put it in. Its a 99 trans am.
I can't get anything to work properly and trying to figure this out. It seems they did something before me because there are a bunch of wires tapped into on the passenger floor but my headlights don't work, my fog lights steady blink. Starter doesn't enable etc. The dash lights blink. Etc. Just trying to get ideas where to start I'm not too familiar with f body's. Thank you.
I can't get anything to work properly and trying to figure this out. It seems they did something before me because there are a bunch of wires tapped into on the passenger floor but my headlights don't work, my fog lights steady blink. Starter doesn't enable etc. The dash lights blink. Etc. Just trying to get ideas where to start I'm not too familiar with f body's. Thank you.
