Gauge Cluster Issue
#1
Teching In
Thread Starter
Gauge Cluster Issue
I have a 2002 Z/28, and I just swapped to a 2000-2001 TA Gauge cluster. Everything works fine except now the AIR BAG lights stays on. I have no idea why, it wasn't before. Unless the previous owner disabled it?
Does anyone have any idea why it would stay on?
Thanks
Does anyone have any idea why it would stay on?
Thanks
#4
TECH Fanatic
iTrader: (3)
I recommended he check the light in the old cluster because hes trying to see if the prior owner had it disabled and his airbag light should have been on all along before he put the TA cluster in. The cluster is already out, its literally a 2 minute job or less to take the lense off and pull up the plexiglass the gauge face is mounted to.
#5
Teching In
Thread Starter
I recommended he check the light in the old cluster because hes trying to see if the prior owner had it disabled and his airbag light should have been on all along before he put the TA cluster in. The cluster is already out, its literally a 2 minute job or less to take the lense off and pull up the plexiglass the gauge face is mounted to.