What kind of bulbs are these?
Low beams are standard 55w H1 bulb? Is there a better HID kit that I can use to replace this? The housing is very specific and the bulb is held with a latch mechanism which also serves as a ground. If you put the bulb in the housing and don't fasten the latch over it, it won't light up. I'm assuming the aftermarket kits like Morimoto run the ground a different way? I was Looking at the Morimoto H1 XB HID kit, 55w, 6500k, HD relay but would it even make a difference with these crappy housings?
Last edited by 5.7stroker; Oct 13, 2018 at 03:38 PM.
H1 HID bulbs will have both wires to the bulb so you'll not have any ground issues.
I had those housings with HID in my old 98, and they weren't bad. I would NOT run 55W HID in them though, you'll burn stuff up. 35W is the highest I'd go.
https://www.youtube.com/watch?v=5R2sBzkxDzQ
Low beams are standard 55w H1 bulb? Is there a better HID kit that I can use to replace this? The housing is very specific and the bulb is held with a latch mechanism which also serves as a ground. If you put the bulb in the housing and don't fasten the latch over it, it won't light up. I'm assuming the aftermarket kits like Morimoto run the ground a different way? I was Looking at the Morimoto H1 XB HID kit, 55w, 6500k, HD relay but would it even make a difference with these crappy housings?
https://www.amazon.com/GE-Lighting-H.../dp/B000UHFO8Q
Right now, I'm running a Xentec H1 hid kit in 6K color and they look great in those Spyder headlights.






