subs for trans am
Thread Starter
Teching In
Joined: Jun 2004
Posts: 27
Likes: 0
From: Sacramento
subs for trans am My Trans am Is the first car I went all out with performence mods and not stereo but I need some sound. I dont want to give up my T top spot so im getting the stealth box for subthump.com
I dont want to add too much weight to the car either. Im not going for crazy SPL like I used to I just want some nice SQ that sounds clean with some good bass.
I am goign to use my old school RF225.2 rated 500x1 at 4 ohm (really puts out 650-750 RMS) think im gonna go with Either 2 Alpine type R 10" or one RE SE 10" or possably 12" or a single DIAMOND AUDIO 10" M6 TITANIUM , or possably a JL 10w3?
I had 2 RE SE in my mustang that was pretty loud for 10's
The rest of the system is gonna be like this
Alpine 9830 head unit
Im gonna sell my JL 300/2 for the JL 300/4 (4x75) to power
JL XR650-CSI 6.5 components (might keep the150x2 for these and use smaller amp on rear fill)
and either my old infinity kappa 5.25 for rear fill or some JL depending on how they sound.
Basacly I want some good sound quality that gets a little loud but not over the top Like my past sytems. any one heard any of the subs I listed in a camaro or TA? or any other subs that fit the specs.....
1 sub-600WRMS or 2 300RMS each
needs to work in a 0.6 cu FT sealed box
SQ is most important.
I dont want to add too much weight to the car either. Im not going for crazy SPL like I used to I just want some nice SQ that sounds clean with some good bass.
I am goign to use my old school RF225.2 rated 500x1 at 4 ohm (really puts out 650-750 RMS) think im gonna go with Either 2 Alpine type R 10" or one RE SE 10" or possably 12" or a single DIAMOND AUDIO 10" M6 TITANIUM , or possably a JL 10w3?
I had 2 RE SE in my mustang that was pretty loud for 10's
The rest of the system is gonna be like this
Alpine 9830 head unit
Im gonna sell my JL 300/2 for the JL 300/4 (4x75) to power
JL XR650-CSI 6.5 components (might keep the150x2 for these and use smaller amp on rear fill)
and either my old infinity kappa 5.25 for rear fill or some JL depending on how they sound.
Basacly I want some good sound quality that gets a little loud but not over the top Like my past sytems. any one heard any of the subs I listed in a camaro or TA? or any other subs that fit the specs.....
1 sub-600WRMS or 2 300RMS each
needs to work in a 0.6 cu FT sealed box
SQ is most important.
sorry I forgot to mention that.I have a punch 800 on them.if it rattles I cant hear it inside the car but I would have to guess yes it shakes change in the cup holder pretty violently.
