bulb harness keeps frying
bulb harness keeps frying hey, i have this problem and i dont know wat it could be causing this or is it a normal thing for f-bodies?
My harnesses for the bulbs are all burnt black!! I noticed that the rears in the taillights are really bad and need to be replaced. In the front run signal, for example, i ws replacing the bulb when the harness just shattered and i couldnt install a new bulb because the locking pins were gone. I replace it and withina few months, it started to get black and toasty again.
I really dont want to replace these harnesses every few months so i would like to know how to remedy this.
any suggestions?
My harnesses for the bulbs are all burnt black!! I noticed that the rears in the taillights are really bad and need to be replaced. In the front run signal, for example, i ws replacing the bulb when the harness just shattered and i couldnt install a new bulb because the locking pins were gone. I replace it and withina few months, it started to get black and toasty again.
I really dont want to replace these harnesses every few months so i would like to know how to remedy this.
any suggestions?
Happened to me, where the harness/socket pretty much melted, the dealer told me it was because I was not using dilectric <sp?> grease on the socket when I installed a new bulb <to keep moisture and condensation out>.
