aftermarket tach??

Reply Subscribe

Thread Tools

Search this Thread

Jan 22, 2006 | 10:45 PM

painter13x2000

Thread Starter

Teching In

Joined: Jan 2006

Posts: 6

Likes: 0

aftermarket tach??

Where on gods green earth do I place the green tach wire on the veh?? 1995 Z-28....................HELP ME!! thanks

Jan 24, 2006 | 09:50 AM

painter13x2000

Thread Starter

Teching In

Joined: Jan 2006

Posts: 6

Likes: 0

By the way it is the grey connector with the white wire on the coil.

Jan 24, 2006 | 11:56 AM

jimmy 2 Times

TECH Fanatic

iTrader: (18)

Joined: Nov 2002

Posts: 1,067

Likes: 0

From: norristown PA

you can try this, this is to hook up a remote start. Im not sure if this tach wire is the same

Quote:

CHEVROLET, CAMARO, 1995, Tachometer

White-V6, red/black-V8. Location is front of left cylinder head for V6 and at a 4 pin plug at the passenger side valve cover for the V8.

Jan 24, 2006 | 11:57 AM

jimmy 2 Times

TECH Fanatic

iTrader: (18)

Joined: Nov 2002

Posts: 1,067

Likes: 0

From: norristown PA

you want to test that with your DMM........and remember to set it to AC as opposed to DC

May 1, 2006 | 11:30 PM

P97LT106

Staging Lane

Joined: Apr 2006

Posts: 55

Likes: 0

no no, your all wrong. i just put my tach in. The best place to connect the green wire off an aftermarket tach is to the computer. GM uses a white wire off the "red" connector as a TACH OUT. This will be the most accurate place to connect any aftermarket tach. It is best cause LT1 stock tachs are about 200 RPM's fast. You will have to pull the computer to get to it