Programing a keyless entry remote on a 2000 Corvette?
06-02-2006, 12:54 PM
#2
TECH Fanatic
iTrader: (5)
Join Date: Nov 2005
Location: Sweeny Texas
Posts: 1,701
Likes: 0
Received 0 Likes
on
0 Posts
I bought my remote off of ebay and these are the instructions that came with it, as stupid as they sound, they worked.
1. Pull the radio fuse out of the panel
2. Put the key in the ignition and turn to run and then back to off, repeat this 3 times in 5 seconds, this should unlock the doors and pop the hatch.
3. Hold the lock and unlock button on the remote down for 15 seconds, door locks should pop and the latch for the hatch will do the same.
4. Put the fuse for the radio back in and your remote should work.
I'm going off of memory, I have the actual instructions somewhere at the house, I'll look for them when I get home.
1. Pull the radio fuse out of the panel
2. Put the key in the ignition and turn to run and then back to off, repeat this 3 times in 5 seconds, this should unlock the doors and pop the hatch.
3. Hold the lock and unlock button on the remote down for 15 seconds, door locks should pop and the latch for the hatch will do the same.
4. Put the fuse for the radio back in and your remote should work.
I'm going off of memory, I have the actual instructions somewhere at the house, I'll look for them when I get home.
