Hey PAC guys.. Need some help..
Hey PAC guys.. Need some help.. Ok.. The PAC was very easy to install, but I bought it used with out directions. From what I understand:
1) You press the program button
2) Then it asks for the steering wheel button
3) Asks for remote button
4) Repeat 2 and 3 untill done
After a few seconds it blinks 3 times and should be programmed correct?
Here is the problem. If I Program all the functions after it blinks 3 times, one function will always stick (Volume goes all the way up, or mute will go on/off/on/off ect).. If I only program 1 function that function works perfect (Tried several single functions, volume up, volume down, mute, ect).. After about 10 times of trying multiple functions last night, I pulled the fuse out of it and just let it be.
Since I don't have the dirrections, I'm wondering if I am missing something in the programming process. Am I doing this right? Does some one have dirrections they can scan in for me? Or does it seem something is wrong with the unit?
Thank people for helping me out here..
1) You press the program button
2) Then it asks for the steering wheel button
3) Asks for remote button
4) Repeat 2 and 3 untill done
After a few seconds it blinks 3 times and should be programmed correct?
Here is the problem. If I Program all the functions after it blinks 3 times, one function will always stick (Volume goes all the way up, or mute will go on/off/on/off ect).. If I only program 1 function that function works perfect (Tried several single functions, volume up, volume down, mute, ect).. After about 10 times of trying multiple functions last night, I pulled the fuse out of it and just let it be.
Since I don't have the dirrections, I'm wondering if I am missing something in the programming process. Am I doing this right? Does some one have dirrections they can scan in for me? Or does it seem something is wrong with the unit?
Thank people for helping me out here..
On The Tree
Joined: Jun 2002
Posts: 122
Likes: 0
From: Pensacola
Re: Hey PAC guys.. Need some help.. dude find out the model number of the one you got and repost. they made diffent models of the piece your talking about and if you have a newer version like the swix it has different modes for different cars and you might have it in the wrong mode for your car. also you listed it as a pac question, most people think of a pac as a highlow adapter for adding a amp so not everyone is looking at your post.
