stereo problem!!!!!

Reply Subscribe

Thread Tools

Search this Thread

Oct 26, 2006 | 08:17 PM

white_ls1z28

Thread Starter

Staging Lane

Joined: Sep 2006

Posts: 73

Likes: 0

From: Bryant, Arkansas

amp power problems!!!!!

I recently swithced to a bigger amp and then back, when i switched back i blew a fuse so i replaced it with the same size fuse. Then the amp wouldnt get power even after i replaced the fuse, so i switched the amps again, that one wouldnt work either. My friend let me borrow his amp and it wouldnt work either. I checked all the fuses and none of them are blown. Can anyone tell wats wrong??

Last edited by white_ls1z28; Oct 26, 2006 at 08:35 PM.

Oct 27, 2006 | 12:22 AM

todddchi

TECH Fanatic

iTrader: (3)

Joined: Aug 2005

Posts: 1,373

Likes: 1

From: Detroit, MI

Bad ground? Remote turn on? Did you check your inline fuse, not just the fuse on the amps?

Oct 27, 2006 | 03:56 PM

white_ls1z28

Thread Starter

Staging Lane

Joined: Sep 2006

Posts: 73

Likes: 0

From: Bryant, Arkansas

yeah i checked the inline fuse to, ill check the ground, im guessing by remote turn off you mean turned it off at the head unit

Oct 27, 2006 | 04:00 PM

white_ls1z28

Thread Starter

Staging Lane

Joined: Sep 2006

Posts: 73

Likes: 0

From: Bryant, Arkansas

i just went and check the ground and its good

Oct 27, 2006 | 04:00 PM

Lubricant

Staging Lane

Joined: Jun 2005

Posts: 55

Likes: 0

From: Elmont, NY

There is a wire that should go to the amp. That is the REM wire..
Tells the amp the radio is on, and its time to turn on.
You can test by putting 12v to it and see if the amp turns on.

Reply Subscribe

Thread Tools

Search this Thread

Show Printable Version

Email this Page

Reply Share

First
Prev
1 / 1
Next
Last