Frequency response of sail panels?
TECH Fanatic
Joined: Oct 2006
Posts: 1,003
Likes: 3
From: Champaign/Chicagoland
Originally Posted by Gordon0652
i wanna guess a lowcut off at 80hz maybe...
Or I guess lowcut at 80Hz would mean you think its high-pass at 80 Hz (since you replaced pass with cut) -- we know this isn't the case though, because if you put full-range speakers there, they only reproduce lower frequencies.
Thread Starter
On The Tree
Joined: Apr 2007
Posts: 145
Likes: 0
From: Boise, ID
It's possible there's a hpf in there as well. Many mono amps have them as subsonic filters. But either way, I don't care much about the low end, I'd like to know where the high end cuts out on them. I'm trying to think about how my midbass is going to be if I have an amp & sub replacing those and it only goes up to 250Hz. So if the monsoon speakers are like 400Hz LPF, then I just have to take into consideration I'll be losing all the 250-400Hz that they handle.
TECH Fanatic
Joined: Oct 2006
Posts: 1,003
Likes: 3
From: Champaign/Chicagoland
Originally Posted by Gordon0652
Sorry, i ment the high pass.
