Wiring, Stereo & Electronics Audio Components | Radars | Alarms - and things that spark when they shouldn't

Those who have subs

Thread Tools
 
Search this Thread
 
Old 07-23-2007 | 09:55 PM
  #1  
crapyboy750's Avatar
Thread Starter
TECH Enthusiast
 
Joined: Jan 2007
Posts: 578
Likes: 0
From: Sugar Land, Tx
Default Those who have subs

Where'd you guys put the ground wire coming from ur amp. In a camaro. If you have pics that would really help me out also thanks.
Old 07-23-2007 | 10:43 PM
  #2  
bmnicolosi's Avatar
TECH Regular
iTrader: (2)
 
Joined: Feb 2006
Posts: 484
Likes: 0
From: Kenner, LA
Default

to the bolt for the seat belt assembly if i make an amp rack, if i just put the amp in the well, i ground to the side of the well at the bottom
Old 07-23-2007 | 10:47 PM
  #3  
Jimpep's Avatar
Registered User
 
Joined: Jul 2007
Posts: 3
Likes: 0
Default

You Might Have To Pull Back Some Carpet But Sand A Dime Sized Spot And Put It Right On The Frame,
Old 07-23-2007 | 10:49 PM
  #4  
crapyboy750's Avatar
Thread Starter
TECH Enthusiast
 
Joined: Jan 2007
Posts: 578
Likes: 0
From: Sugar Land, Tx
Default

any pictures
Old 07-23-2007 | 10:57 PM
  #5  
megabass's Avatar
Staging Lane
 
Joined: Jan 2004
Posts: 91
Likes: 0
Default

Originally Posted by crapyboy750
any pictures
I grounded mine to the trunk lock bracket. As I recall, I think that hole was already there, so no drilling.

Old 07-23-2007 | 11:04 PM
  #6  
crapyboy750's Avatar
Thread Starter
TECH Enthusiast
 
Joined: Jan 2007
Posts: 578
Likes: 0
From: Sugar Land, Tx
Default

thats a good spot but the only problem now that i have is that all my wires are already cut because i had my subs in a different car before so now i guess i have to put it were ever i can. But would i be able to ground it under neath the carpet right behind the rear seats?
Old 07-24-2007 | 12:39 PM
  #7  
bbal4now's Avatar
Teching In
 
Joined: Nov 2006
Posts: 48
Likes: 0
Default

Although I don't recommend grounding to sheet metal, if you take out the drivers side panel in the rear hatch area and grind off all of the paint right below the rear speakers that makes an accessible grounding spot. You can take out the gas tank spout cover (it is only held in by two screws) and you can run a bolt through the sheet metal and secure it with a locking nut. If you are constrained by the lack of wire, that may be the best bet.




All times are GMT -5. The time now is 05:56 PM.