DEI 530T help!!!
03-20-2008, 06:47 PM
#1
Staging Lane
Thread Starter
Join Date: Aug 2007
Location: Neenah, WI
Posts: 98
Likes: 0
Received 0 Likes
on
0 Posts
DEI 530T help!!! installed the 530t module and it works using the drivers side controls, but I was wondering if there is any way to make it work from the passenger side switch???? any help would be great thanks
03-20-2008, 08:20 PM
#2
The 530T is designed to handle two windows from both switches but you have to hook up the passenger side wires from the module at the passenger's door switch.
Cut the dark blue (not light blue) and the brown (not tan) wires near the passenger's window switch. The module's blue/black wire connects to the motor side of the dark blue wire and the module's green/black wire connects to the motor side of the brown wire. The module's brown/black wire connects to the switch side of the brown wire and the module's white/black wire connects to the switch side of the dark blue wire.
Cut the dark blue (not light blue) and the brown (not tan) wires near the passenger's window switch. The module's blue/black wire connects to the motor side of the dark blue wire and the module's green/black wire connects to the motor side of the brown wire. The module's brown/black wire connects to the switch side of the brown wire and the module's white/black wire connects to the switch side of the dark blue wire.
03-21-2008, 04:09 PM
#3
Staging Lane
Thread Starter
Join Date: Aug 2007
Location: Neenah, WI
Posts: 98
Likes: 0
Received 0 Likes
on
0 Posts
do you also hook them up in the drivers side door to the light blue and tan or only at the passenger side door, I mean do yous splice the four wires so that they go to both doors or only run the four wires to the pass. side door and not the drivers side door at all?????????
