Are the plx wb outputs programmable?
Thread Starter
11 Second Club
iTrader: (14)
Joined: Nov 2004
Posts: 1,653
Likes: 1
From: Michigan (Macomb or Lansing)
Are the plx wb outputs programmable? I am about to switch to a plx unit from an lc-1.
Just want to make sure that the outputs are programmable.
Basically, i need a linear 0v to 5v wideband output for my gauge/nitrous controller and another linear 0v to 5v wideband output to log through hptuners.
My other option would be to run one wideband ouput to both hptuners and my gauge, will this work if i just run two wires off the wideband analog output, one to the gauge and one to hptuners??
Just want to make sure that the outputs are programmable.
Basically, i need a linear 0v to 5v wideband output for my gauge/nitrous controller and another linear 0v to 5v wideband output to log through hptuners.
My other option would be to run one wideband ouput to both hptuners and my gauge, will this work if i just run two wires off the wideband analog output, one to the gauge and one to hptuners??
Last edited by pHEnomIC; May 20, 2008 at 11:43 AM.
