1 DRL out... need help diagnosing problem

Reply Subscribe

Thread Tools

Search this Thread

Oct 9, 2008 | 12:39 AM

#21

Adam2001WS6

Thread Starter

TECH Enthusiast

iTrader: (1)

Joined: Sep 2008

Posts: 584

Likes: 0

From: Fairfax, Virginia

Will that be messy? Do they make a clear RTV version?

Oct 9, 2008 | 08:08 AM

#22

Intercooler2

11 Second Club

iTrader: (24)

Joined: Mar 2008

Posts: 2,554

Likes: 2

From: North East, MD

Yea. GE Silicone II in a small squeeze bottle. Just let it dry good.

Oct 9, 2008 | 03:40 PM

#23

Launching!

Joined: Oct 2002

Posts: 221

Likes: 0

From: Riegelwood, NC

Quote:

Originally Posted by Adam2001WS6

Also as an added note, the crack on both sides is EXACTLY straight down the middle (a vertical crack). What is this caused by?

I was told they cracked from expansion and contraction from the heat of the bulb and cooling of splashing water. But it could just as easily be from a rock hitting it.

I've thought about getting new housings and drilling a hole in each one to install a respirator exhalation valve in the lowest point. And drill 3 more holes within the diameter of the valve for the water to drain. I'd also install some of the protective film that is made to protect headlights.

Oct 14, 2008 | 05:08 PM

#24

Adam2001WS6

Thread Starter

TECH Enthusiast

iTrader: (1)

Joined: Sep 2008

Posts: 584

Likes: 0

From: Fairfax, Virginia

Well... replaced driver's and passenger's side housing (w/ clear silicone around housings), replaced driver's and passenger's side outter and inner sockets...

DRLs, Turn Signals and Running lights work PERFECTLY!

Thanks all for your help and input.

Reply Subscribe