LS1TECH - Camaro and Firebird Forum Discussion
Took the front support off
Took the front support off
0 2011/03/29 21:50:08
Took rear support off.
Took rear support off.
0 2011/03/29 21:50:08
Took fenders off to sand them.
Took fenders off to sand them.
0 2011/03/29 21:50:08
Took fenders off to sand them.
Took fenders off to sand them.
0 2011/03/29 21:52:32
Going to do some repair to the rip on the bottom right of the LP area.
Going to do some repair to the rip on the bottom right of the LP area.
0 2011/03/31 20:00:37
So far I have spent about 6 hours sanding this bumper
So far I have spent about 6 hours sanding this bumper
0 2011/03/31 20:00:37
Finding little things out about the car I didn't know.
Finding little things out about the car I didn't know.
0 2011/03/31 20:00:37
Damn bondo top right of the bumper
Damn bondo top right of the bumper
0 2011/04/04 12:01:34
Only took 2 days of my time going to the shop to do this.
Only took 2 days of my time going to the shop to do this.
0 2011/04/04 12:01:34
Got half way done and time to leave for the night.
Got half way done and time to leave for the night.
0 2011/04/04 19:14:19
Getting all the bumps off.
Getting all the bumps off.
0 2011/04/04 19:14:19
I will need to detail the car after Im done lol inside has a lot of dust.
I will need to detail the car after Im done lol inside has a lot of dust.
0 2011/04/04 19:14:19
Getting all the bumps out of the side.. I think someone back up into a poll and had a shitty repair job done.
Getting all the bumps out of the side.. I think someone back up into a poll and had a shitty repair job done.
0 2011/04/04 19:17:14
Time to start wet sanding this one.
Time to start wet sanding this one.
0 2011/04/04 19:17:14
More bondo on the car ... The people that did the this most have really liked it.. Taking it all off to see how bad it was.
More bondo on the car ... The people that did the this most have really liked it.. Taking it all off to see how bad it was.
0 2011/04/05 20:54:01
Completed the sanding on this..
Completed the sanding on this..
0 2011/04/05 20:54:01
Side skirting sanded down.
Side skirting sanded down.
0 2011/04/05 20:54:01
Both fenders sanded down.
Both fenders sanded down.
0 2011/04/05 21:00:23
Sanded down back quarter panel
Sanded down back quarter panel
0 2011/04/08 06:39:00
Finished the Spolier. Damn that took along time.
Finished the Spolier. Damn that took along time.
0 2011/04/08 06:39:00
Getting it ready for paint.
Getting it ready for paint.
0 2011/04/09 14:45:49
Off with the doors
Off with the doors
0 2011/04/09 14:45:49
0 2011/04/09 14:45:49
Better shot of the doors. Also getting to door jams painted.
Better shot of the doors. Also getting to door jams painted.
0 2011/04/09 14:48:24
Ready for primer
Ready for primer
0 2011/04/14 06:53:37
Taped up the car..
Taped up the car..
0 2011/04/14 06:53:37
Getting the hatch ready for paint.
Getting the hatch ready for paint.
0 2011/04/17 20:04:53
Fixing the lines on the door i meesed up.
Fixing the lines on the door i meesed up.
0 2011/04/17 20:04:53
Put the hood back on the front after primering it.
Put the hood back on the front after primering it.
0 2011/04/17 20:04:53
Primered /Sealing the sail panel.
Primered /Sealing the sail panel.
0 2011/04/17 20:09:48
Started to roll the fender and found out some more bad news. Found out the people that did the work just used 1/4 in of bondo to fix a dent.
Started to roll the fender and found out some more bad news. Found out the people that did the work just used 1/4 in of bondo to fix a dent.
0 2011/04/17 20:09:48
Another shoot of the bondo.
Another shoot of the bondo.
0 2011/04/17 20:09:48
Shitty body shop drilled holes to pop out some of the dents and didn't even weld up the holes.
Shitty body shop drilled holes to pop out some of the dents and didn't even weld up the holes.
0 2011/04/17 20:22:53
We needed to see how bad the damage really was... We got out a grinder and just went at it.. Car probably has 15 pounds of bondo on the one panel.
We needed to see how bad the damage really was... We got out a grinder and just went at it.. Car probably has 15 pounds of bondo on the one panel.
0 2011/04/17 20:22:53
Took it all down to metal to see what im working with.. Im to scared to go any closer to the edge of the door ...Im afraid it might be all bondo too.
Took it all down to metal to see what im working with.. Im to scared to go any closer to the edge of the door ...Im afraid it might be all bondo too.
0 2011/04/17 20:22:53
Just finished wet sanding the front bumper. Ready for paint
Just finished wet sanding the front bumper. Ready for paint
0 2011/04/19 09:18:05
Wet sanded the primer to find any small bumps in the metal.
Wet sanded the primer to find any small bumps in the metal.
0 2011/04/19 09:18:05
Getting all the nails set to pull the dents
Getting all the nails set to pull the dents
0 2011/04/20 20:09:46
lol Hellraiser..
lol Hellraiser..
0 2011/04/20 20:09:46
Welded up all the damn holes that the other body shop drilled.
Welded up all the damn holes that the other body shop drilled.
0 2011/04/20 20:09:46