LS1TECH - Camaro and Firebird Forum Discussion
Another coat or two of primer.
Another coat or two of primer.
0 2023/08/06 18:36:05
I also bought some high temp ceramic coating spray paint in attempt to do something about my completely rusted out headers. I attempted to sand them out but got frustrated and conceded to acknowledge that I will just need to buy new ones. I had already bought the paint and thought, what the hell and see how they would turn out. I was pleasantly surprised at what they turned out to look like with one coat. Not sure how long if at all coating will last but damn sure happy with results.
I also bought some high temp ceramic coating spray paint in attempt to do something about my completely rusted out headers. I attempted to sand them out but got frustrated and conceded to acknowledge that I will just need to buy new ones. I had already bought the paint and thought, what the hell and see how they would turn out. I was pleasantly surprised at what they turned out to look like with one coat. Not sure how long if at all coating will last but damn sure happy with results.
0 2023/08/06 18:36:09
0 2023/08/06 18:36:13
Has a couple small rust areas. sanded down to bare metal and filler where needed.
Has a couple small rust areas. sanded down to bare metal and filler where needed.
0 2023/08/06 18:36:18
Roughly bolted in A/C delete panel. Found some pass through adapter for Holley EFI harness. Cut and mounted into the delete panel as the firewall didn’t have a flat enough surface for mounting.
Roughly bolted in A/C delete panel. Found some pass through adapter for Holley EFI harness. Cut and mounted into the delete panel as the firewall didn’t have a flat enough surface for mounting.
0 2025/07/20 08:21:48
0 2025/07/20 08:21:35
Upward style cowl box that I’m thinking about running.
Upward style cowl box that I’m thinking about running.
0 2025/07/20 08:21:29
0 2025/07/20 08:21:22
Installed the engine back into the car. Looks good with the black painted engine bay.
Installed the engine back into the car. Looks good with the black painted engine bay.
0 2025/07/20 08:21:13
Mounted overflow tank using some river nuts and bolts. Turned out good
Mounted overflow tank using some river nuts and bolts. Turned out good
0 2025/07/20 08:21:05
0 2025/07/20 08:21:09
Mounted the Aeromotive fuel regulator in a spot that would be accessible for when needed. Was a good spot because the LS style Holley kit has an electrical connection for fuel pressure right at this location.
Mounted the Aeromotive fuel regulator in a spot that would be accessible for when needed. Was a good spot because the LS style Holley kit has an electrical connection for fuel pressure right at this location.
0 2025/07/20 08:21:45
The vertical radiator gives it the cleaner look I was looking for.
The vertical radiator gives it the cleaner look I was looking for.
0 2025/07/20 08:21:55
Watched quite a few YouTube and search forums for clverticle radiators. Found the griffin to be the way I wanted to go. Will have a friend weld some tabs up for mounting to core support.
Watched quite a few YouTube and search forums for clverticle radiators. Found the griffin to be the way I wanted to go. Will have a friend weld some tabs up for mounting to core support.
0 2025/07/20 08:21:52
0 2025/07/20 08:21:42
Possible and most reasonable spot to mount the coils. This would make it appear to have a distributor. I wanted to mount on frame rail below headers but room was not my friend.
Possible and most reasonable spot to mount the coils. This would make it appear to have a distributor. I wanted to mount on frame rail below headers but room was not my friend.
0 2025/07/20 08:21:39
Possible hope to cut for cowl intake. Would need to build upward housing to meet the lexan windshield.
Possible hope to cut for cowl intake. Would need to build upward housing to meet the lexan windshield.
0 2025/07/20 08:21:32
0 2025/07/20 08:21:27
0 2025/07/20 08:21:18
0 2025/07/20 09:31:04
0 2025/07/20 09:42:41
0 2025/07/20 09:42:54
0 2025/07/20 09:42:50
EFI connection timing cover to convert to LS style cam and crank with reluctors
EFI connection timing cover to convert to LS style cam and crank with reluctors
0 2025/07/20 09:42:44
0 2025/07/20 09:43:11
You can see the 100LB injectors under the bowls
You can see the 100LB injectors under the bowls
0 2025/07/20 09:49:00
0 2025/07/20 09:49:41
0 2025/07/20 09:49:07
Before trimming cowl
Before trimming cowl
0 2025/07/20 09:49:03
0 2025/07/20 09:49:37
0 2025/07/20 09:49:19
0 2025/07/20 09:49:15
Had to cut into cleaner to make clearance. Will need to seal back up.
Had to cut into cleaner to make clearance. Will need to seal back up.
0 2025/07/20 09:49:11
0 2025/07/20 09:49:31
0 2025/07/20 09:49:53
0 2025/07/20 09:49:49
0 2025/07/20 09:49:45
0 2025/07/20 09:49:34
0 2025/07/20 09:49:26
0 2025/07/20 09:49:23