LS1TECH - Camaro and Firebird Forum Discussion
1994 - 90k miles -
1994 - 90k miles -
0 2025/04/01 01:24:09
0 2025/04/01 01:24:47
0 2025/04/01 01:25:05
0 2025/04/01 01:25:23
Blocks to support the seam Weld for supporting the car when I remove the axle / diff
Blocks to support the seam Weld for supporting the car when I remove the axle / diff
0 2025/04/01 01:25:44
0 2025/04/01 01:26:38
0 2025/04/01 01:27:07
Axle stands are just sitting there... no weight is on them.. before I put the car on the ramps.
Axle stands are just sitting there... no weight is on them.. before I put the car on the ramps.
0 2025/04/01 01:28:05
0 2025/04/06 08:27:39
0 2025/04/06 08:28:48
0 2025/04/06 08:30:40
0 2025/04/06 08:31:35
0 2025/04/06 08:32:25
Not sure I can use these... +22 off set. They maybe a little to wide and they dont seem to make ET38 in the KNP style.
Not sure I can use these... +22 off set. They maybe a little to wide and they dont seem to make ET38 in the KNP style.
0 2025/04/08 02:34:52
0 2025/04/08 02:39:10
0 2025/06/13 00:19:40
0 2025/06/13 00:19:45
0 2025/06/13 00:19:51
0 2025/06/13 00:20:58
0 2025/06/13 00:27:28
0 2025/06/30 03:36:10
Hope its in the right place... I have No idea, only went with info from the net... but looks like everyone's else hole.
Hope its in the right place... I have No idea, only went with info from the net... but looks like everyone's else hole.
0 2025/06/30 03:36:17
used a jig saw to cut the hole, drilled in to the corners so i could get the blade in and make a nice straight cut.
used a jig saw to cut the hole, drilled in to the corners so i could get the blade in and make a nice straight cut.
0 2025/06/30 03:36:15
0 2025/07/29 05:23:37
0 2025/07/29 05:23:16
0 2025/07/29 05:23:32
0 2025/07/29 05:23:28
Clean women ....
Clean women ....
0 2025/07/29 05:23:42
0 2025/07/29 05:23:45
0 2025/07/29 05:26:01
0 2025/07/29 05:26:05
Rust under the seam seal
Rust under the seam seal
0 2025/08/16 02:16:54
Ready for degrease...
Ready for degrease...
0 2025/08/16 02:18:35
0 2025/08/16 02:19:28
0 2025/08/16 02:17:52
0 2025/08/16 02:19:24
Back end - nice and clean, no point stripping the seam seal off here.... I hope...
Back end - nice and clean, no point stripping the seam seal off here.... I hope...
0 2025/08/16 02:19:21
0 2025/08/20 01:36:32
0 2025/08/20 01:36:37
0 2025/08/20 01:36:42