LS1TECH - Camaro and Firebird Forum Discussion
Got the firewall and frame horns painted.
Got the firewall and frame horns painted.
0 2018/04/01 18:36:45
0 2018/04/01 18:38:11
Installed the rest of the accessories. Steering rack bolted right up to the UMI k-member.
Installed the rest of the accessories. Steering rack bolted right up to the UMI k-member.
0 2018/04/01 18:40:19
Original T56 cleaned up.
Original T56 cleaned up.
0 2018/04/01 18:42:18
0 2018/04/07 08:13:27
Off of the stand and onto blocks to install the flywheel, clutch, trans.
Off of the stand and onto blocks to install the flywheel, clutch, trans.
0 2018/04/07 12:42:25
0 2018/04/07 12:44:52
Clutch installed.
Clutch installed.
0 2018/04/07 12:45:47
Finally time to roll it in.
Finally time to roll it in.
0 2018/04/07 12:47:53
0 2018/04/07 12:48:34
0 2018/04/07 12:50:50
0 2018/04/07 12:51:39
0 2018/04/07 12:55:30
Pulled the pwr str shaft seal out, just waiting on a new one to be delivered.
Pulled the pwr str shaft seal out, just waiting on a new one to be delivered.
0 2018/04/10 03:52:43
Headers are now clearing the steering shaft and subframe.
Headers are now clearing the steering shaft and subframe.
0 2018/04/10 03:55:07
C7 front discs
C7 front discs
0 2018/04/10 03:57:42
0 2018/04/26 10:56:16
0 2018/04/26 10:56:18
Clearanced the TSP long tubes to fit the UMI kmember. Wasn't much work to do so.
Clearanced the TSP long tubes to fit the UMI kmember. Wasn't much work to do so.
0 2018/04/28 07:12:53
0 2018/04/28 07:12:55
0 2018/04/28 07:12:58
New belts for the SLP underdrive pulley setup.
New belts for the SLP underdrive pulley setup.
0 2018/04/28 07:13:00
FTP lid came in.
FTP lid came in.
0 2018/04/28 07:13:03
Bought a replacement inner boot.
Bought a replacement inner boot.
0 2018/04/28 07:13:06
New seal for the steering rack.
New seal for the steering rack.
0 2018/04/28 07:13:08
0 2018/04/28 07:13:11
Clearanced the header around the steering shaft.
Clearanced the header around the steering shaft.
0 2018/04/28 07:13:14
0 2018/04/28 07:13:17
Parts needed for the Brembo swap.
Parts needed for the Brembo swap.
0 2018/04/28 07:32:14
0 2018/04/28 07:32:17
15 mm spacer.
15 mm spacer.
0 2018/04/28 07:32:19
C7 stingray discs in 17" Fikse FM5.
C7 stingray discs in 17" Fikse FM5.
0 2018/04/28 07:32:22
14mm hole drilled in spindle.
14mm hole drilled in spindle.
0 2018/04/28 07:32:25
0 2018/04/28 07:32:28
Plenty of clearance in the Fikse wheel drum.
Plenty of clearance in the Fikse wheel drum.
0 2018/04/28 07:32:31
0 2018/04/28 07:32:34
0 2018/04/28 07:32:36
0 2018/04/28 07:32:39
0 2018/04/28 07:32:41
0 2018/04/28 07:32:44