![](https://ls1tech.com/forums/customavatars/avatar125428_2.gif)
eb110americana
November 29, 2018
1) The factory trailing arms don't fit. One side was close and only required light grinding, the other side required grinding about 1/8" off the bushing to fit between the brackets. The provided grade 8/10.9 hardware is too large to fit through the bushing as well. I had to reuse the factory bolts. You could say, "This requires an aftermarket part," but mixing aftermarket parts often causes more problems.
More About This Picture
Vehicle
N/A
Location
N/A
Keywords
N/A
Discover More Pictures
See MoreAdvertisement
Be the first to comment on this picture!