LS1TECH - Camaro and Firebird Forum Discussion
Added a 67 SS emblem to the grille. Also stripped the black side marker and tail lights for a cleaner look.
Added a 67 SS emblem to the grille. Also stripped the black side marker and tail lights for a cleaner look.
0 2018/01/28 13:52:09
Car is on Koni Yellows and Vogland springs. I removed the rear isolators and SS bumpstop spacers. Had to roll the rear fender lips.
Car is on Koni Yellows and Vogland springs. I removed the rear isolators and SS bumpstop spacers. Had to roll the rear fender lips.
0 2018/01/28 13:51:36
Car put down 438/380 on this dyno, IATs were in the upper 90s.
Car put down 438/380 on this dyno, IATs were in the upper 90s.
0 2018/01/28 13:39:30
Entered it into the local Pepboy's dyno challenge and won highest horsepower NA.
Entered it into the local Pepboy's dyno challenge and won highest horsepower NA.
0 2018/01/28 13:30:27
0 2018/01/28 13:24:28
0 2018/01/28 13:23:26
I drove it for a few months without the front grille just to change up the look.
I drove it for a few months without the front grille just to change up the look.
0 2018/01/28 13:22:31
Unfortunately had a full tank of gas. Not bad for a T-top car.
Unfortunately had a full tank of gas. Not bad for a T-top car.
0 2018/01/28 13:21:37
Put it on the scale after doing the front bumper support, rear seat, and radio delete.
Put it on the scale after doing the front bumper support, rear seat, and radio delete.
0 2018/01/28 13:20:58
0 2018/01/27 18:42:58
0 2018/01/26 10:50:53
0 2018/01/26 10:50:51
First time auto crossing in general, it was a blast. Car handled very well, even on drag radials.
First time auto crossing in general, it was a blast. Car handled very well, even on drag radials.
0 2018/01/26 10:50:50
While dyno tuning the car, we noticed that it was passing oil on decel. After researching I found that I forgot to seal my rocker arm bolts since these heads are ported. Easy fix.
While dyno tuning the car, we noticed that it was passing oil on decel. After researching I found that I forgot to seal my rocker arm bolts since these heads are ported. Easy fix.
0 2018/01/26 10:49:52
0 2018/01/26 10:18:00
315/35/17 Nitto 555Rs
315/35/17 Nitto 555Rs
0 2018/01/26 10:17:59
0 2018/01/26 10:17:57
All polished up.
All polished up.
0 2018/01/26 10:17:56
0 2018/01/26 10:17:54
0 2018/01/26 10:17:52
Wet sanding, removing the machine finish.
Wet sanding, removing the machine finish.
0 2018/01/26 10:17:51
0 2018/01/26 10:17:49
Stripping the clear coat.
Stripping the clear coat.
0 2018/01/26 10:17:47
0 2018/01/26 10:17:45
0 2018/01/26 10:17:43
Test fitting the rears.
Test fitting the rears.
0 2018/01/26 10:17:41
Scored a set of Fikse FM5's wheels from a fellow Louisiana ls1tech member, they just needed to be refinished.
Scored a set of Fikse FM5's wheels from a fellow Louisiana ls1tech member, they just needed to be refinished.
0 2018/01/26 10:17:40
Time for some new wheels.
Time for some new wheels.
0 2018/01/25 10:24:49
0 2018/01/25 10:24:47
Got it dyno tuned, baseline was 450 on the mail tune. Reading on the high side but I did baseline on the same dyno months ago so I know how much I gained.
Got it dyno tuned, baseline was 450 on the mail tune. Reading on the high side but I did baseline on the same dyno months ago so I know how much I gained.
0 2018/01/25 10:24:44
And it works.
And it works.
0 2018/01/25 10:24:43
0 2018/01/25 10:24:41
Notice where I installed them?
Notice where I installed them?
0 2018/01/25 10:24:40
Catch cans came in.
Catch cans came in.
0 2018/01/25 10:24:38
Fast 36 Ib injectors installed.
Fast 36 Ib injectors installed.
0 2018/01/25 10:24:36
First cruise after the HCI install still on Mail tune from Frost.
First cruise after the HCI install still on Mail tune from Frost.
0 2018/01/25 10:24:34
Ready to hit the pavement. Only took 2 weeks working on it after hours.
Ready to hit the pavement. Only took 2 weeks working on it after hours.
0 2018/01/25 10:18:19
0 2018/01/25 10:18:17
0 2018/01/25 10:18:16
This was installed with a UMI Tunnel mount Torque Arm.
This was installed with a UMI Tunnel mount Torque Arm.
0 2018/01/25 10:18:14