LS1TECH - Camaro and Firebird Forum Discussion
0 2026/05/18 16:42:55
Still needs some TLC to get it finished up.
Still needs some TLC to get it finished up.
0 2026/05/18 16:42:51
0 2026/05/18 16:42:46
Used my very novice welding skills to fab up a flange for the windshield. The windshield will be trimmed around this area.
Used my very novice welding skills to fab up a flange for the windshield. The windshield will be trimmed around this area.
0 2026/05/18 16:42:40
0 2026/05/18 16:42:36
Pulled the trigger on the polycarbonate optic armor front and rear windshields
Pulled the trigger on the polycarbonate optic armor front and rear windshields
0 2026/05/18 16:42:31
Loosely hung the body panels.
Loosely hung the body panels.
0 2026/05/18 16:42:27
Trimmed the accelerator cable and got it hooked up. Installed pedal and steering column back in.
Trimmed the accelerator cable and got it hooked up. Installed pedal and steering column back in.
0 2026/05/18 16:42:23
Found the mounting spot for the American Autowire fuse panel.
Found the mounting spot for the American Autowire fuse panel.
0 2026/05/18 16:42:17
Cleaned it up and painted both black.
Cleaned it up and painted both black.
0 2026/05/18 16:42:13
Took some scrap aluminum from the cold aro cowl and made it into a top mounting bracket for the fan shroud.
Took some scrap aluminum from the cold aro cowl and made it into a top mounting bracket for the fan shroud.
0 2026/05/18 16:42:09
0 2026/05/18 11:12:01
0 2026/05/18 11:11:57
0 2026/05/18 11:11:51
0 2026/05/18 11:11:45
0 2026/05/18 11:11:38
0 2026/05/18 11:11:33
0 2026/05/18 11:11:27
0 2026/05/18 11:11:21
0 2026/05/18 11:11:13
0 2026/05/18 11:11:07
Found location
Found location
0 2026/05/18 11:11:02
Instead of drilling and tapping into top of water pump, I elected to install into union with gates heat shrink hose clamps.
Instead of drilling and tapping into top of water pump, I elected to install into union with gates heat shrink hose clamps.
0 2026/05/18 11:10:57
0 2026/05/18 11:10:49
0 2026/05/18 10:41:42
0 2026/05/18 10:41:37
0 2026/05/18 10:41:34
0 2026/05/18 10:41:31
Still not a welder but I put together a serviceable piece.
Still not a welder but I put together a serviceable piece.
0 2026/05/18 10:41:28
Attempting to make the mounting flange for windshield and cold air cowl. The
Attempting to make the mounting flange for windshield and cold air cowl. The
0 2026/05/18 10:41:24
0 2026/05/18 10:41:21
0 2026/05/18 10:41:17
Pulled the trigger in front and rear polycarbonate windshields from optic armor. With be bolted in.
Pulled the trigger in front and rear polycarbonate windshields from optic armor. With be bolted in.
0 2026/05/18 10:41:13
Remade my brake line a few times. Bought a bender off Amazon for tighter bends.
Remade my brake line a few times. Bought a bender off Amazon for tighter bends.
0 2026/05/18 10:41:08
Loosely hung the body panels on. Forgot how bad some of the paint was.
Loosely hung the body panels on. Forgot how bad some of the paint was.
0 2026/05/18 10:41:04
Top view of the setup.
Top view of the setup.
0 2026/05/18 10:41:01
Found a mounting home for the fuse block and began to run wires. American auto wire kit with everything needed for a basic set up. Will still be using the column style ignition for now.
Found a mounting home for the fuse block and began to run wires. American auto wire kit with everything needed for a basic set up. Will still be using the column style ignition for now.
0 2026/05/18 10:40:58
0 2026/05/18 10:40:54
Reused some of the aluminum body flashing from the cowl duct to vent and make a quick top radiator support
Reused some of the aluminum body flashing from the cowl duct to vent and make a quick top radiator support
0 2026/05/18 10:40:50
Loosely ran battery to starter wiring with junction block on A/C delete panel. This will has been cleaned up and completed. Also started wiring kit first m American autowire for the rest of the vehicle.
Loosely ran battery to starter wiring with junction block on A/C delete panel. This will has been cleaned up and completed. Also started wiring kit first m American autowire for the rest of the vehicle.
0 2026/03/26 05:02:08