7.30 1/8 mile I reckon good for 11's
#1
Launching!
Thread Starter
iTrader: (6)
Join Date: Mar 2009
Location: Southern IN
Posts: 248
Likes: 0
Received 0 Likes
on
0 Posts
7.30 1/8 mile I reckon good for 11's
Finally got to make some passes this year with the TH400. This is not my best pass but the best i got on video. What would that be roughly in the 1/4?
7.37 @95mph
1.65 60ft
http://www.youtube.com/watch?v=UExceVIIBG8
7.37 @95mph
1.65 60ft
http://www.youtube.com/watch?v=UExceVIIBG8
#4
TECH Enthusiast
iTrader: (7)
Join Date: Jan 2011
Location: north dakota
Posts: 741
Likes: 0
Received 0 Likes
on
0 Posts
11.59 @ 117 mph if what i get when i plug the numbers. not 100% exact but gets ya close http://www.wallaceracing.com/8th-quarter.php
#6
Launching!
Thread Starter
iTrader: (6)
Join Date: Mar 2009
Location: Southern IN
Posts: 248
Likes: 0
Received 0 Likes
on
0 Posts
440whp
lq4
patriot ls6 heads
ls6 intake
pacesetters, magnaflow catback\
unknown th400
fti converter- footbrakes to 3600
torque arm, lca's 9" 4.11's
about 3800lbs
i havent launched off the transbrake yet and gonna spray 100 to it next time. I don't have a cage in yet so im not gonna spray the big shot just yet. Made 700hp on a 200
lq4
patriot ls6 heads
ls6 intake
pacesetters, magnaflow catback\
unknown th400
fti converter- footbrakes to 3600
torque arm, lca's 9" 4.11's
about 3800lbs
i havent launched off the transbrake yet and gonna spray 100 to it next time. I don't have a cage in yet so im not gonna spray the big shot just yet. Made 700hp on a 200
Trending Topics
#12
10 Second Club
iTrader: (3)
I think you'll pick up if you have Greg re-stall the converter and loosen it up. However, I know someone running pretty much the same setup as you. Car runs ~ 11.3s on motor (with the nitrous tune... lots of timing taken out). However, I've seen it run 10.9s on motor with a different tune. LQ9, 200 shot, TH400, FTI converter. We've come to the conclusion it's a 3600 stall. He goes mid to high 1.6s on motor and low 1.3s off the Transbrake on the 200 shot. However, I feel he needs to have it loosened up to a 4200. FTI converters are tight which makes driveability nice. They're also efficient so you're not losing a lot on the top end. And they Love the nitrous. I told Greg to build me a converter for a 450 rwhp car on a 200-250 shot (future plans). And he did. My little ole stock motor was struggling with it. I'm pretty sure it was a 3500-3600 stall. I sent it back and had him restall it to 4200. Best 60' N/A has been a 1.60' which isn't bad for 305 rwhp. But, I've gone 1.41 60' off the Transbrake on a 150 shot that put down 424 rwhp. I'm 3600+ lbs raceweight.
So, my point is.. I bet that thing is going to hammer out of the hole on the Tbrake and juice. However, your N/A 60' will suffer quite a bit. IMO, you'll get the best of both if you loosen it up to at least a 4200 stall, if not, even higher.
So, my point is.. I bet that thing is going to hammer out of the hole on the Tbrake and juice. However, your N/A 60' will suffer quite a bit. IMO, you'll get the best of both if you loosen it up to at least a 4200 stall, if not, even higher.
#13
10 Second Club
iTrader: (27)
Join Date: Mar 2009
Location: Kissimmee, FL / Vienna, VA
Posts: 810
Likes: 0
Received 1 Like
on
1 Post
I'd just give Greg a call because I know it could use a little more stall speed. It should be going 1.50's on motor especially with that kind of power. You can have a happy medium between how it runs on motor and how it runs on the spray.
#18
TECH Apprentice
iTrader: (4)
Join Date: Jul 2002
Location: ohio
Posts: 362
Likes: 0
Received 0 Likes
on
0 Posts
440whp
lq4
patriot ls6 heads
ls6 intake
pacesetters, magnaflow catback\
unknown th400
fti converter- footbrakes to 3600
torque arm, lca's 9" 4.11's
about 3800lbs
i havent launched off the transbrake yet and gonna spray 100 to it next time. I don't have a cage in yet so im not gonna spray the big shot just yet. Made 700hp on a 200
lq4
patriot ls6 heads
ls6 intake
pacesetters, magnaflow catback\
unknown th400
fti converter- footbrakes to 3600
torque arm, lca's 9" 4.11's
about 3800lbs
i havent launched off the transbrake yet and gonna spray 100 to it next time. I don't have a cage in yet so im not gonna spray the big shot just yet. Made 700hp on a 200
#19
Launching!
Thread Starter
iTrader: (6)
Join Date: Mar 2009
Location: Southern IN
Posts: 248
Likes: 0
Received 0 Likes
on
0 Posts
if i ever spray it, they will surely kick me out. Let me know when you go. There is a lack of lsx cars down there and when i do see one it is stock. What kinda times you run? Just send me a pm and we will hook up. I plan on going to US 60 on the 21st for the no prep arm drop race and there is a track rental on the 28th there also. I am inviting you. Will be about 10 bucks. Come on down!