12's!!
04-13-2006, 08:26 AM
#1
Teching In
Thread Starter
Join Date: Apr 2006
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
12's!! I just got ahold of a 1995 Camaro Z28 with a 6speed, Long tubes, 3" single open exhaust, aftermarket driveshaft and control arms, Electric waterpump, A/C completely removed as is the cruise and power steering. Ran a 12.80 @111 with a drag radial and light launch ( stock 10 bolt rear with 4.10's ).
I need to rebuild the rear diff with new bearings a girdle and do the best I can with it, I want to get a 9" or 12 bolt but that takes $$$.
I have a N.O.S systems fogger kit , and with a good tune I willbe putting in 150 Hp jets and starting from there on slicks.
I should be in the low 11's with a mild launch..
I need to rebuild the rear diff with new bearings a girdle and do the best I can with it, I want to get a 9" or 12 bolt but that takes $$$.
I have a N.O.S systems fogger kit , and with a good tune I willbe putting in 150 Hp jets and starting from there on slicks.
I should be in the low 11's with a mild launch..
04-13-2006, 08:31 AM
#2
12 Second Club
iTrader: (1)
Join Date: Aug 2005
Location: Lancaster, MA
Posts: 765
Likes: 0
Received 0 Likes
on
0 Posts
Dang you better start saving money for rear end then, u got stock 10 bolt with slicks and spraying on a 6spd not goin to last if u hook up good i would say 3-5 laucnhes.
04-17-2006, 03:51 PM
#5
trapping 111 with a bolt-on lt1 with minor weight reduction is impressive.
i had a charged 94 lt1 6 spd on the stock 10 bolt with 410s. i was running 6 lbs through a powerdyne charger and only trapped 114. full weight car with all of the accessories, etc..
i had a charged 94 lt1 6 spd on the stock 10 bolt with 410s. i was running 6 lbs through a powerdyne charger and only trapped 114. full weight car with all of the accessories, etc..