fbody supercharger on a gto
Id imagine you'd have to be concerned on the accessory setup as they are different and designed to run with how the pulleys are set up on that model. Also hood clearance may be a issue but I kinda doubt it.
What kind of blower are you looking at is the big question.
And what modifications are required for putting it on an Fbody? I know alot of them require notching the cowl
If nothing else you can call the makers and see what the differences are
And what modifications are required for putting it on an Fbody? I know alot of them require notching the cowl
If nothing else you can call the makers and see what the differences are
Thread Starter
On The Tree
Joined: Feb 2012
Posts: 122
Likes: 0
Would love a procharger kit but cant afford it so if i were to d one i may do a vortech. I actually did do some research tonight and found that base kits for the gto by vortech are discontinued but the v2 kit for a gto still seems to be available. It was about $2700 if i recall. But if i could find a vortech from a fbody im thinking i could find one quite a bit cheaper
TECH Addict
Joined: Sep 2009
Posts: 2,481
Likes: 5
From: PA/MD
If your looking for a desk, you might want to troll some mustang forums too, most of them are basically the same when it comes to the procharger or vortec style, just different brackets. Some different models of Mustangs came stock with them trying to keep up with the ls1s 
Thread Starter
On The Tree
Joined: Feb 2012
Posts: 122
Likes: 0
If your looking for a desk, you might want to troll some mustang forums too, most of them are basically the same when it comes to the procharger or vortec style, just different brackets. Some different models of Mustangs came stock with them trying to keep up with the ls1s
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
TECH Fanatic
Joined: Sep 2005
Posts: 1,584
Likes: 23
From: NYC
The fbody and GTO share the same pulleys so it will work. If it's a Maggie, you may have hood clearance problems, but your question is not very focused. What kind of supercharger are you looking at???
Thread Starter
On The Tree
Joined: Feb 2012
Posts: 122
Likes: 0
