MSD 2 Step plug n play Help
#1
MSD 2 Step plug n play Help
So I have sort of a "noob" question in regards to the wiring for the plug n play 2 step from MSD. I want to tap in the blue wire directly to the clutch pedal switch but I am not sure where it is located? Is it up high on the firewall behind the pedal?
And I know there are supposed to be 2 wires on the switch, does anyone know which one I tap into?
Thanks!
And I know there are supposed to be 2 wires on the switch, does anyone know which one I tap into?
Thanks!
#6
TECH Regular
iTrader: (21)
Join Date: Mar 2008
Location: Colorado
Posts: 432
Likes: 0
Received 0 Likes
on
0 Posts
Yeah its part of the wireing harness then enters the PCM. Search in this section or look through my post and it should get you to the right spot. No need to run any wires throught the firewall.
Trending Topics
#8
So I ran into an issue with the power wire last night. I first had it tapped into the green wire from the clutch sensor but that would only activate the 2step with the keys on/ignition off. As soon as I turned on the car, the 2step would turn off. So I switched to the purple with white stripe wire and the same thing... Is there another clutch switch/ set of wires I should be looking for?
From looking online people have used the purple or green wire but neither are working for me. I already have the wire through the firewall from a previous install and didnt want to tap into the pcm harness.
Any ideas?
From looking online people have used the purple or green wire but neither are working for me. I already have the wire through the firewall from a previous install and didnt want to tap into the pcm harness.
Any ideas?
#11
TECH Regular
iTrader: (21)
Join Date: Mar 2008
Location: Colorado
Posts: 432
Likes: 0
Received 0 Likes
on
0 Posts
I had your same issues...Then I was referred to try the grey wire on the PCM and it works perfect when the clutch is pushed in. The MSD box also does not interfer well your shifting.
#14
Just to sum this up i found the 4 wires for the clutch sensor and the wire that is needed to tap into is the grey wire. Hooked it up and the 2 step works like a charm. Hope this helps anyone out there who doesnt know which wire to tap into. So either under the dash, or on the pcm harness, the grey wire is your friend!