How do I identify ls6 28.8 injectors?

Reply Subscribe

Thread Tools

Search this Thread

Feb 2, 2006 | 04:35 PM

MSGHUFF

Thread Starter

10 Second Club

iTrader: (7)

Joined: Jun 2004

Posts: 260

Likes: 0

From: Fayetteville, NC

How do I identify ls6 28.8 injectors?

I bought some injectors that supposedly came from a 2004 Zo6 I got them and tried to cross ref the part numbers but am not having any luck? Can anyone help?

Feb 2, 2006 | 05:09 PM

MSGHUFF

Thread Starter

10 Second Club

iTrader: (7)

Joined: Jun 2004

Posts: 260

Likes: 0

From: Fayetteville, NC

found my own answer...
Delphi / Bosch
28 lb / hr Injector
Part Number 12561462 (Bosch # 0 280 155 931) - This is a LS1 factory GM injector.
Static Flow Rate: 28 lb/hr (294cc) @ 43.5PSI (300kPa)
Fan spray pattern for superior atomization.
High pressure capability
High Impedance / High-Z

Apr 16, 2006 | 12:11 PM

98Z28CobraKiller

Restricted User

iTrader: (17)

Joined: Nov 2005

Posts: 5,783

Likes: 5

From: WPB, FL

thanks for the info

Apr 18, 2006 | 12:58 PM

stang90gt50

Banned

iTrader: (6)

Joined: Mar 2006

Posts: 271

Likes: 2

From: CA

I didnt think LS6's were rated at 28.8...i coulda swore it was something different.

Apr 18, 2006 | 01:17 PM

2xLS1

TECH Senior Member

iTrader: (25)

Joined: Nov 2001

Posts: 5,649

Likes: 9

From: Warr Acres, OK

Quote:

Originally Posted by MSGHUFF

found my own answer...
Delphi / Bosch
28 lb / hr Injector
Part Number 12561462 (Bosch # 0 280 155 931) - This is a LS1 factory GM injector.
Static Flow Rate: 28 lb/hr (294cc) @ 43.5PSI (300kPa)
Fan spray pattern for superior atomization.
High pressure capability
High Impedance / High-Z

That would be a 32.5 lb/hr at 58PSI and looking at a stock 04 LS6 IFR table, they appear to use around a 29.3 lb/hr injector.

29.14, 29.33, 29.51, 29.7, 29.89, 30.01, 30.2, 30.38, 30.57, 30.75, 30.94, 31.06, 31.25, 31.44, 31.56, 31.75, 31.93,

Apr 18, 2006 | 02:16 PM

MSGHUFF

Thread Starter

10 Second Club

iTrader: (7)

Joined: Jun 2004

Posts: 260

Likes: 0

From: Fayetteville, NC

Quote:

Originally Posted by 2xLS1

FWIW The info I got was copied directly from the Delphi/ Bosch website using the part numbers off mine and a friends zo6

Apr 18, 2006 | 09:07 PM

AllThrottle4U

12 Second Club

iTrader: (14)

Joined: Mar 2003

Posts: 225

Likes: 0

From: Houston,TX

This is a good question, I've got the same injectors sitting in my garage waiting to go in. Gm part numbers match and delphi pt#'s match. The stock IFR for 28.8lb injectors is different, check them out

28.70852 28.89454 29.08055 29.26657 29.45258 29.57660 29.76261 29.94863 30.13464 30.25866 30.44467 30.63069 30.81670 30.94072 31.12673 31.31275 31.43676

I want to make sure I use the right IFR when I put them in.

6 Gifts Neither Your Dad Nor Grad Will Shove Into the 'Trinket Drawer'

Brett Foote

Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?

Pouria Savadkouei

Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine

Verdad Gallardo

7 Most Reliable High-Performance Engines GM Has Ever Built

Verdad Gallardo

Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin

Verdad Gallardo

6 Common C5 Corvette Failures and What's Involved In Repairing Them

Pouria Savadkouei

Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph

Verdad Gallardo

Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked

Pouria Savadkouei

Top 10 Most Powerful Chevy Trucks Ever Made!

Hennessey's New Supercharged Silverado ZR2 Has 700 HP

Verdad Gallardo

Apr 27, 2006 | 03:23 PM

ChiefDave

11 Second Club

Joined: Jun 2005

Posts: 147

Likes: 0

Hey brother!!! Did you swap these out? Heck we might put the 40s on my car for fun and you can have my oems. Damn it needs to stop raining

Dave

Apr 27, 2006 | 08:26 PM

#10

MSURacing

Launching!

iTrader: (1)

Joined: Feb 2004

Posts: 296

Likes: 1

From: Minnesota

Actually there are three part numbers:

GMP-12554271 - 97-98
GMP-12561462 - 01-04
GMP-12482704 - 01-04

Apr 27, 2006 | 11:10 PM

#11

2xLS1

TECH Senior Member

iTrader: (25)

Joined: Nov 2001

Posts: 5,649

Likes: 9

From: Warr Acres, OK

Quote:

Originally Posted by MSURacing

Actually there are three part numbers:

GMP-12554271 - 97-98
GMP-12561462 - 01-04
GMP-12482704 - 01-04

Can you be more specific on the vehicle models for those #s. We're talking about Z06 LS6 injectors.

Apr 28, 2006 | 09:35 AM

#12

MSURacing

Launching!

iTrader: (1)

Joined: Feb 2004

Posts: 296

Likes: 1

From: Minnesota

Those are all the numbers I have. They all flow the same amount, just the 1248 are more than likely the LS1 and the 1256 are for the LS6.

May 3, 2006 | 10:56 PM

#13

gearheads78

TECH Enthusiast

iTrader: (29)

Joined: Aug 2003

Posts: 662

Likes: 0

From: Dallas TX

my 98's were 12554271
I looked at ones off a stock 01 SS and they were 12561462

Sep 12, 2006 | 08:30 AM

#14

LostCauseZ06

11 Second Club

iTrader: (4)

Joined: Jul 2005

Posts: 1,294

Likes: 0

From: Ogden, Utah

i just looked at my injectors for my 02 Z06, they are 12561462

Aug 13, 2009 | 12:12 AM

#15

dark ws6

Teching In

Joined: Jan 2008

Posts: 37

Likes: 0

From: Phoenix, AZ

I am planning on swaping my stock ls1 intake for the ls6 out of a '04 cts-V including the fuel rails and the injectors. I did a little research and ls1 stock injectors are 24 lb/hr and the ls6 (12561462) are 28 lb/hr. My questions is if I need to retune my PCM? thanks in advance..