27 or 28 inch drag radials for 9.5" TT2's without cutting bumper/ground effects?
#1
10 Second Club
Thread Starter
iTrader: (5)
Join Date: Jul 2005
Location: by my computer
Posts: 2,958
Likes: 0
Received 0 Likes
on
0 Posts
27 or 28 inch drag radials for 9.5" TT2's without cutting bumper/ground effects?
Looking to kill some gear on the highway and still be able to make a few passes. Personally I like BFG Drag Radials since they last awhile. My question is whether or not you can fit a 27 inch setup on a 17inch rim without hacking the bumper or ground effects/fenders.
I do have Adj. LCAs.... panhard, and rolled fenders. I will be running a TH400 so I need to kill some gear. Car has 3.90's on a full spool w/ 35 spline axles.
Without going with 26 inch tires.... what setup will give me 27 or 28 on the TorqueThrust2 9.5/17 wheels. ???
They need to hook also!
I do have Adj. LCAs.... panhard, and rolled fenders. I will be running a TH400 so I need to kill some gear. Car has 3.90's on a full spool w/ 35 spline axles.
Without going with 26 inch tires.... what setup will give me 27 or 28 on the TorqueThrust2 9.5/17 wheels. ???
They need to hook also!
#2
9 Second Club
iTrader: (14)
How about these. 28" tire. I plan on putting a set on my 17x11 TT II's to cruise around on. My 325/50 MT DR's didn't require any cutting, so I don't see why these would either.
# M&H Drag Radial Tire 325/45R17
# Rear Tire
676-ROD-05R
Tire Overall Diameter: 28.0''
Average Roll Out/
Circumference: 88''
Tire Tread Width: 10.3''
Tire Section Width: 12.1''
Wheel Diameter: 17''
Required
Wheel Width: 10''
# M&H Drag Radial Tire 325/45R17
# Rear Tire
676-ROD-05R
Tire Overall Diameter: 28.0''
Average Roll Out/
Circumference: 88''
Tire Tread Width: 10.3''
Tire Section Width: 12.1''
Wheel Diameter: 17''
Required
Wheel Width: 10''
#3
10 Second Club
Thread Starter
iTrader: (5)
Join Date: Jul 2005
Location: by my computer
Posts: 2,958
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by SSmokin 01
How about these. 28" tire. I plan on putting a set on my 17x11 TT II's to cruise around on. My 325/50 MT DR's didn't require any cutting, so I don't see why these would either.
# M&H Drag Radial Tire 325/45R17
# Rear Tire
676-ROD-05R
Tire Overall Diameter: 28.0''
Average Roll Out/
Circumference: 88''
Tire Tread Width: 10.3''
Tire Section Width: 12.1''
Wheel Diameter: 17''
Required
Wheel Width: 10''
# M&H Drag Radial Tire 325/45R17
# Rear Tire
676-ROD-05R
Tire Overall Diameter: 28.0''
Average Roll Out/
Circumference: 88''
Tire Tread Width: 10.3''
Tire Section Width: 12.1''
Wheel Diameter: 17''
Required
Wheel Width: 10''
M&H Drag Radial Tire
275/50R17
Rear Tire
676-ROD-06R
Tire Overall Diameter: 28.0''
Average Roll Out/
Circumference: 88''
Tire Tread Width: 8.8''
Tire Section Width: 10.7''
Wheel Diameter: 17''
Required
Wheel Width: 9''
I assume if it didnt I could take em back and pick up a set of these?