6LITEREATER

iTrader: (56)

Being that my car is a 1998 it has the older style steering wheel. It was fine until recently when the car's appearance has been majorly updated.






Basically, the car is being styled after ZL1 and Dick Harrell cars (front bumper, houndstooth racing seats, ebony interior from a 2001, etc...) and all of those cars had the newer style steering wheel.

Long story short, my steering wheel is just really becoming an eyesore to me...



SO, I thought about making a 2010 Camaro wheel fit inside...



However, it would have useless buttons and looks so much like aftermarket wheels (three spoke) I figured I might as well just get an aftermarket wheel. I just have no clue what to get that will look "modern" and good in our interior...

So far, my only thoughts are a Flaming River Waterfall...



What do you think? Any other ideas?

squee

iTrader: (16)

I like the one you posted, but I was thinking of going with a 2010 wheel and making the buttons work, cause I'm actually starting to miss my stereo controls. I still have my stock 2000 wheel, if you want it...

Jersey Mike

iTrader: (9)

Tackle this project and I'll follow suit.
I miss the feel of this wheel and have thought of what it would look like in my T/A. (Minus the woodgrain, obviously).

Swiat34

iTrader: (9)

I'll be getting this for my Trans Am:

MOMO Millenium EVO wheel

bj350hp

iTrader: (4)

This will be going in my car (If I had a grand to waste on a steering wheel)



http://cgi.ebay.com/ebaymotors/C6-Z0...Q5fAccessories

Spd-Kilz

iTrader: (35)

I quite like the wheel that users Bob Dole (Bdole?), and TheCrazySweed have.

TheCrazySweed has a sparco wheel IIRC.

BlueBird346

iTrader: (13)

I was gonna post this one. I like most of the Sparcos too. The race versions are a little smaller but they're covered in Alcantara.

The Alchemist

iTrader: (19)

That's a badass wheel, but I thought it wouldn't fit in our cars because of a difference colum and the airbags are configured differently.

armintheman

iTrader: (31)

hey guys how much does that momo wheel run?

chaman

iTrader: (5)

If a substitute wheel with functioning radio controls is available I would seriously consider it.

bj350hp

iTrader: (4)

No idea on that. I'm sure there is someway you could get it to fit but the airbag might be a problem.

DTB_LS1

iTrader: (2)

Here's mine, it's a MOMO Tek R.

TUMBLRws6

iTrader: (1)

bj350hp that looks badass!

put a catfish in the center instead of the vette flags

Irish350

iTrader: (14)

^that, i bet we all show up in the same threads from ages past, all of them with the same comlaints.

I do like all the ones posted a lot, (which is saying something for aftermarket wheels which i normally dislike), but I want airbags and buttons, plus the stock/nice look these all have is what im lookin for.

99'CajunFirehawk157

iTrader: (57)

Sounds like a 6Le steering wheel package is coming soon...LOL

BlueBird346

iTrader: (13)

Says $320 on their site.

Brangeta

You might just use a 2000-2002 Camaro wheel with steering wheel controls

BobDoLe

iTrader: (11)

i like this momo commando r wheel and 3+ years later, it is holding up flawlessly. the car is a kick in the pants to drive and i think the stock wheel was limiting that. you can still find it in stock at a lot of places, but i don't think they make it anymore (in all black leather).


i'd recommend a momo wheel for the quality alone, but they also have a few different styles http://www.momousa.com/products/prod...html?limit=all

99_Z_155

iTrader: (7)

Do you guys feel comfortable without an airbag? obviously you do. i might have issues with not having one.

Ghostintheshell

Those seats look great!