Will this shifter knob fit my car???
#1
Staging Lane
Thread Starter
Join Date: Apr 2014
Location: Austin
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
Will this shifter **** fit my car???
Ok so I have a 98 trans am and was wondering if a t-handle b&m shift **** will fit . It says for autos and manuals and has thread inserts for
SAE 0.5-20; 3/8-24; 3/8-16; 5/16-18; 1/2-20
So does anyone know what size thread the 4l60e shifter **** is... Id love to get a better looking shifter as the faded leather is horrible haha.
SAE 0.5-20; 3/8-24; 3/8-16; 5/16-18; 1/2-20
So does anyone know what size thread the 4l60e shifter **** is... Id love to get a better looking shifter as the faded leather is horrible haha.
#3
TECH Enthusiast
iTrader: (11)
You need one of these:
http://www.ws6project.com/user_stor/...pter-f-body-1/
You'll take your factory **** off, and install this. Then you can install any aftermarket shift **** with a M16x1.50 thread pattern. You'll shift by pushing the whole **** down.
Here's my MBA adapter with a Hurst T-handle. The leather boot is from an '03 Impala.
http://www.ws6project.com/user_stor/...pter-f-body-1/
You'll take your factory **** off, and install this. Then you can install any aftermarket shift **** with a M16x1.50 thread pattern. You'll shift by pushing the whole **** down.
Here's my MBA adapter with a Hurst T-handle. The leather boot is from an '03 Impala.
#4
Staging Lane
Thread Starter
Join Date: Apr 2014
Location: Austin
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
You need one of these:
http://www.ws6project.com/user_stor/...pter-f-body-1/
You'll take your factory **** off, and install this. Then you can install any aftermarket shift **** with a M16x1.50 thread pattern. You'll shift by pushing the whole **** down.
Here's my MBA adapter with a Hurst T-handle. The leather boot is from an '03 Impala.
http://www.ws6project.com/user_stor/...pter-f-body-1/
You'll take your factory **** off, and install this. Then you can install any aftermarket shift **** with a M16x1.50 thread pattern. You'll shift by pushing the whole **** down.
Here's my MBA adapter with a Hurst T-handle. The leather boot is from an '03 Impala.