Not bad for stock valve covers
#1
TECH Apprentice
Thread Starter
iTrader: (8)
Join Date: Nov 2005
Location: Colorado Springs
Posts: 311
Likes: 0
Received 0 Likes
on
0 Posts
Not bad for stock valve covers
Got bored not doing anything with the car yet so I decided to do some cleaning. I'm not done yet. Gonna give it another round of buffing then start on the other
#7
TECH Regular
Join Date: May 2002
Location: Greybull, Wy
Posts: 442
Likes: 0
Received 0 Likes
on
0 Posts
Looks good! I did mine 2yrs ago and they still look as good as then. Get some nicer bolts for the coil packs and other stuff. Ace Hardware has a good supply of shiney metric bolts.
Trending Topics
#10
That's what she said...
iTrader: (8)
Originally Posted by ArcticZ28
Ok I'm gonna ask the typical question... what tool and polish did you use?
Make sure you wear safety glasses and what not.
I also did the outside of my throttle body and outsides of the MAF ends. I've got a new set of 99+ valve covers on the way that I plan on doing the same thing with. I'll post up some pictures of how it's done.
I'm not sure what this guy did, but mine look more or less the same, and it only took about 10-15 minutes per side if you keep at it.
https://ls1tech.com/forums/generation-iii-external-engine/428410-pics-greddy-catch-can-install-56k.html
There's some pics in that thread, but they don't give the valve covers credit. I've done 2 different throttle bodies, both turned out nice.
#11
TECH Apprentice
Thread Starter
iTrader: (8)
Join Date: Nov 2005
Location: Colorado Springs
Posts: 311
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by ArcticZ28
Ok I'm gonna ask the typical question... what tool and polish did you use?
#16
Banned
iTrader: (92)
Originally Posted by 80superbu
They're not done yet...plus I don't want to pay for chrome when I have so much free time :-)
I've wrote countless books of advice and products to use through pm's and posts and almost none spend just the minimum $100 needed to get the basic power supplies that I guide them to.
My sig says Chrome+P but the engine in the sig is totally polished.
You just need to sand a bit more in the grooves, go all the way down to 1200 grit paper and use this pad only from Eastwood from start to final buff along with tripoli only and use very light pressure on the part during the final go over with the same buff using your favorite paste polish.
I know you'll get to the next level with just these two items, especially the ventilated buff, it "slaps" the part.
Buff Wheel Yellow Treated Ventilated
For Fastest Cut On Contoured Hard or Soft Metals
Faster Cutting, Longer Lasting Treated Buffs - Our new line of treated buffs work faster, longer than non-treated buffs. Suitable for faster material removal, these wheels take the place of standard and ventilated buffs. Used with Stainless Steel Compound (13001) or Tripoli Compound (13135). Great on hard or soft metals!
13231 Buff Wheel 8" Yellow Treated Ventilated 1/2" Hole $9.99
Buffing Compound-Tripoli
For Medium Cutting Action on Aluminum and Other Soft Metals
Tripoli is ideal for soft aluminum, brass, pot metal, pewter, and more. The medium cutting action is aggressive enough to remove 220 grit and finer scratches. Tripoli is usually used on Spiral sewn cotton wheels (treated and untreated) as well as treated and untreated buffs. It also works well on mini buffs and felt bobs. This compound is usually followed by White Rouge Compound. Made in the USA.
11926 Buffing Compound-Tripoli-1lb Bars, 3 Pack $13.99
13135 Buff Compound Tripoli 13 oz Tube $6.99