00WHITETA

iTrader: (1)

I was wondering where I can find an aftermarket radiator support. I seen one on bmr website but I don't want the polished one. I just really would like a black one don't need all that bling under the hood, when I already don't have any at all ya know! Im putting the sts turbo on right now didn't want the factory one to be there!
Thanks
Jimmy

WILWAXU

iTrader: (6)

A little sand paper and some paint go along way.

Lets try this over in the appearence section.

Beasst8

iTrader: (1)

Agreed, spend a few bucks at the local auto store for some 320, 400, 600, 1000 grit sandpaper, some filler primer, a can of duplicolor of your choice and some clear. Good To Go.

Beasst8

iTrader: (1)

Here use this.. https://ls1tech.com/forums/showpost....61&postcount=9

00WHITETA

iTrader: (1)

Yes I understand I could do this! But, why buy something that pretty just to make it ugly! I was wondering if maybe someone already made a black one.
Thanks
Jimmy

parbreak

iTrader: (17)

Well, your choices are pretty limited. You can either buy an $89 BMR support and a $5 can of paint or buy a $300 FIPK kit that comes in black and throw away the $200 filter.

Bryan

3800RS

iTrader: (15)

how about a stock lt-1 piece ? maybe you can get a little creative with that

00WHITETA

iTrader: (1)

Well I just remembered my next door neighbor is a air condition guy, so I can just get him to bend me up some sheet metal

Irocss85

iTrader: (1)

ATI uses a black steel sheetmetal upper rad. support to replace the stock one. but then you'll have to get a diff. air filter setup. here's the best pic I got. look under the air box for the supercharger.

[IMG]
[/IMG]

navymitch12

iTrader: (1)

just use the stock lt1 support its like 30$ from the dealership and its black

mcmillion

iTrader: (5)

Exactly