Derale pan on 4L80e
03-30-2009, 06:24 AM
#2
i was gonna get one-which filter are you using, the late model one with 4 **** on it, or earlier one that is flat on the bottom
if you have the late one, maybe the early one will fit-do they mention anything in the insts.
how close is it?-if your using a shift kit w/v/b stiffiner, it makes it tighter, pushes the filter towards the pan
if you have the late one, maybe the early one will fit-do they mention anything in the insts.
how close is it?-if your using a shift kit w/v/b stiffiner, it makes it tighter, pushes the filter towards the pan
03-30-2009, 10:48 AM
#3
On The Tree
Thread Starter
iTrader: (4)
Join Date: Nov 2006
Location: OKC
Posts: 192
Likes: 0
Received 0 Likes
on
0 Posts
Using the late model filter... with the 4 ****
I think you got it because that is where the pan hits, along with the slightly thicker vlave body plate would do it. Nothing is mentioned but I will check the auto parts stores and atleast look at the earlier filters.
I think you got it because that is where the pan hits, along with the slightly thicker vlave body plate would do it. Nothing is mentioned but I will check the auto parts stores and atleast look at the earlier filters.
03-31-2009, 11:25 AM
#7
On The Tree
Thread Starter
iTrader: (4)
Join Date: Nov 2006
Location: OKC
Posts: 192
Likes: 0
Received 0 Likes
on
0 Posts
Got it worked out.
For future reference, those with 4l80's; regardless of the year of your transmission, you must use the earlier model (flat) filter when using the derale pan.
For future reference, those with 4l80's; regardless of the year of your transmission, you must use the earlier model (flat) filter when using the derale pan.
