shifting problems
12-10-2009, 11:47 PM
#1
Teching In
Thread Starter
iTrader: (2)
Join Date: Jun 2009
Location: Pell lake WI
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
shifting problems In desperate need of help. I have tried a couple of ford forums but it appears they don't like to help. This is my winter vehicle while my TA hibernates for the winter.
Ok I have a 96 ranger 4x4 with a 4r55e. I just did the valve body rebuild. I installed the ford TSB's and superior correction kit. Didn't install the pressure riser or intermediate servo spring. Shifts again but lazily. This happens in all gears. It will shift but slow. Also When kicking down into a passing gear it will just rev up. It will not hook a gear. When I replaced the epc solenoid one of the shift and tcc solenoids popped out. What am I missing?
Ok I have a 96 ranger 4x4 with a 4r55e. I just did the valve body rebuild. I installed the ford TSB's and superior correction kit. Didn't install the pressure riser or intermediate servo spring. Shifts again but lazily. This happens in all gears. It will shift but slow. Also When kicking down into a passing gear it will just rev up. It will not hook a gear. When I replaced the epc solenoid one of the shift and tcc solenoids popped out. What am I missing?
