94 m6 to an a4 swap
#1
On The Tree
Thread Starter
iTrader: (3)
Join Date: Jul 2009
Location: michigan
Posts: 126
Likes: 0
Received 0 Likes
on
0 Posts
94 m6 to an a4 swap
Just wondering what everyone has done about the hole in the floor when swapping from a m6 to an a4?How did you mount the auto shifter?Just looking for ideas..Thanks for any helpThis is being done on a 94 2z8
#2
Cover it up with a sheet metal plate.
Or go to the local pick your part with a battery powered sawzall and cut the area out of a factory A4 f body.
Then weld it, pop rivet it, screw it down, etc.
Or go to the local pick your part with a battery powered sawzall and cut the area out of a factory A4 f body.
Then weld it, pop rivet it, screw it down, etc.