TCI guys What stall do you have and what 60`s have you gotten?
#6
11 Second Club
I've done:
Dyno'd 319 rwhp and 337 rwtq through stock converter (LT's, duals, lid, CAI, !FSB, untuned), added SSF3500 and 26x10.5x16 ET streets. 60's were 1.72-1.75.
Restalled to 4000, added TSP MS3, SLP UD pulley and LS6 intake. Dyno'd 385 rwhp and 360 rwtq, 60's are 1.64-1.65 still on 26" ET streets with bone stock suspension.
Dyno'd 319 rwhp and 337 rwtq through stock converter (LT's, duals, lid, CAI, !FSB, untuned), added SSF3500 and 26x10.5x16 ET streets. 60's were 1.72-1.75.
Restalled to 4000, added TSP MS3, SLP UD pulley and LS6 intake. Dyno'd 385 rwhp and 360 rwtq, 60's are 1.64-1.65 still on 26" ET streets with bone stock suspension.
Trending Topics
#10
Moderator
iTrader: (11)
Join Date: Mar 2002
Location: East Central Florida
Posts: 12,605
Likes: 0
Received 6 Likes
on
6 Posts
I have a 3000/2.2 and have never seen below 2.0 60'
(lowered, factory chubby for the most part, and on
street rubber). Go for tires if you want a converter
to improve your launch.
(lowered, factory chubby for the most part, and on
street rubber). Go for tires if you want a converter
to improve your launch.
#13
99 ta TCI 3800 2.6 stator 3.42s stock weight minus centerlines 3560lb . put down 342rwhp used to to between 1.55 and 1.62 consistently and run 11.80s at 112/113mph..on 26x10 ET streets.
#15
10 Second Club
iTrader: (2)
Join Date: Sep 2002
Location: Orlando, Florida
Posts: 6,368
Likes: 0
Received 0 Likes
on
0 Posts
TCI 3800 stall 2.7 str/1.61 60' on drag radial/no suspension except for lca's/full weight
get the 3800 you'll thank me later. drives great on the street. Got mine from Travis at Texas Speed and Performance.
get the 3800 you'll thank me later. drives great on the street. Got mine from Travis at Texas Speed and Performance.
#16
TECH Fanatic
Join Date: Nov 2001
Location: cyberspace
Posts: 1,002
Likes: 0
Received 0 Likes
on
0 Posts
high 1.70s were avarage for me.
i have the 3000 2.2 1 streetfighter.
mods at the time were headers, lid, magnaflow exhaust, rocker arms (1.85), dyno tuning and nitto 555r tires.
i have the 3000 2.2 1 streetfighter.
mods at the time were headers, lid, magnaflow exhaust, rocker arms (1.85), dyno tuning and nitto 555r tires.
#20
12 Second Club
Join Date: Oct 2004
Location: Arlington,TX
Posts: 207
Likes: 0
Received 0 Likes
on
0 Posts
stock with nothing other than converter 1.79 at a shity track with shity nittos. Im sure with slicks a low 1.7 high 1.6 is very posible. I was having to feather it out of the hole. I have pulled a 2.5 on it with a 100 shot and bold stock tires. hahahahaha