12secSS

iTrader: (30)

We finally have a new trans temp gauge, and complimentary coolant gauge. These new Blackout Series 2-1/16” gauges offer a high contrast lens, LED backlighting, full sweep. Below is a picture of the trans temp gauge installed in my 2001 Camaro SS. I installed the gauge on the test port of the 4L60E and verified the results with HPTuners, it was within 2-3 degrees. The trans temp gauge (#80330) retail for $80.00 and the Coolant gauge (#80331) retails for $75.00. I used the convertible plate and mounted the gauge on it, it compliments the interior very well. It is very easy to see in daylight and very clear at night. The guage is blacked out when the power is shut off.

Blacker

iTrader: (3)

Seems like a popular loaction and looks great. That is where I have my Innovate Wideband Gauge. That gives the Camaro Guys an option other than the pods type gauges.

HPT BANDIT

iTrader: (2)

Does it include a sender that will fit into the 4L60E? I never bought one before but I plan on it for my future mods.

thunderstruck

iTrader: (15)

where is the test port?

12secSS

iTrader: (30)

Yeah, I never really liked the pillar pods. I figure, if I delete the cig lighter, I can mount two gauges there. That is all I really want. The trans temp and a vacuum gauge.

Yes! I comes with the 1/8 NPT sender, as well as mounting hardware.

The test port is located on the driver's side of the trans, just above the trans shift lever.

HPT BANDIT

iTrader: (2)

Sweet!

mpe488

I might want to invest in that at the same time as my cooler, and stall. Thanks.

HPT BANDIT

iTrader: (2)

Did you buy that from one of the sponsors or someone else?

12secSS

iTrader: (30)

Any one of the LS1Tech sponsors, that carry B&M products, should be able to get this for you.

mvonada

George, thanks great timing, just getting ready to install my TH400.

natronathon

can you get to the test port from underneath the center console?

12secSS

iTrader: (30)

Nope! You need to go from under the vehicle, see attached pic.