2-3 shift problem
#1
On The Tree
Thread Starter
iTrader: (17)
Join Date: Jan 2004
Location: Corpus Christi,Tx
Posts: 164
Likes: 0
Received 0 Likes
on
0 Posts
2-3 shift problem
I have a problem with my car not shifting to third gear under full throttle. When doing normal driving the car shifts fine. First-Second shift shifts good. Just getting into third gear it over revs. Tranny was just built about 15k miles ago at most. No codes popping up.
#2
TECH Regular
iTrader: (2)
Join Date: Nov 2007
Location: OK,Elk City
Posts: 434
Likes: 0
Received 0 Likes
on
0 Posts
I'm having the same problem! Can't figure it out. Messed with the tuning, asked for a lot of help by some tunning experts.. Next is to hook up a pressure gauge.. It has a stall 3500rpm and shift kit. I'll keep you posted with diag. good luck.
#3
On The Tree
Thread Starter
iTrader: (17)
Join Date: Jan 2004
Location: Corpus Christi,Tx
Posts: 164
Likes: 0
Received 0 Likes
on
0 Posts
So after a little reading on here I'm thinking it could be my 3-4 clutches going out or I read somewhere where the tunning on shift points might be the problem. Where the shift command might need to be lowered to the actual shift point. I figured if my 3-4 clutches were going out wouldn't my tranny be slipping. Any suggestions?