Nitrous carb guys and 6010 box
#1
11 Second Club
Thread Starter
iTrader: (46)
Join Date: Oct 2002
Location: tulsa ok
Posts: 1,617
Likes: 0
Received 0 Likes
on
0 Posts
Nitrous carb guys and 6010 box
What plugs are y'all running. I like autolite plugs And what kinda timing do you run with a 150 plate. I'm currently 35 after 3000. I figured I would start around 29* and look at plugs
#2
#5
11 Second Club
Thread Starter
iTrader: (46)
Join Date: Oct 2002
Location: tulsa ok
Posts: 1,617
Likes: 0
Received 0 Likes
on
0 Posts
There ported 853's aprox 65cc chambers. Ls2 guts in motor. I run 35 total NA all in by 2800. I was headed out last fri but the car killed the alt just after I pulled in gate so I didn't spray it any barely made any NA passes
#7
10 Second Club
iTrader: (35)
Join Date: Feb 2005
Location: Indiana boy
Posts: 4,174
Likes: 0
Received 0 Likes
on
0 Posts
I would run a #8 plug with 110 gas at around 24-25 deg.
I just ran my carb 383 on a 58N jet and 53F on a zex plate with 110 gas at 25 deg and the afr was 12.2:1. The timing was boarder line. I am pulling a few more to be safe next time and going up from there. My motor is 13:1 cr.
Play it really safe at first. Pull a little more....
I just ran my carb 383 on a 58N jet and 53F on a zex plate with 110 gas at 25 deg and the afr was 12.2:1. The timing was boarder line. I am pulling a few more to be safe next time and going up from there. My motor is 13:1 cr.
Play it really safe at first. Pull a little more....
Trending Topics
#10
I run 31 degrees total and pull 8 degrees for 150 shot running half and half 110 and 93 fuel. I run autolite plugs. I have a safe tune that has given me zero problems. No peppering of the plugs ever. I put as many as 7 - 9 runs out a night or day. I have a stock Ly6 engine with cam, valvesprings and hardened pushrods.