You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join LS1Tech.com today!
Hi there,
I'm from Montreal, Quebec (Canada) and I would like to share with you my little project. It's a 1999 Miata into wich I previously had a LT4 but the guy who put the engine into it did a bad job. Here my first ride: http://www.bfamus.tv/watch.php?mdid=...evy+Miata+1999
Unfortunately we had to take the engine out and we discovered that the heads were perforated. Same time I got a deal on a 2005 LS6 out of a CTS-V Cadillac with a 6 speed manual transmission, I bought it. By that time I started the wide body work.
Here is the car after 5 weeks of hard labour. When the body is finished, I put back in the LS6 and here we go !!!
Complete overview of the car:
The first time we entered the LT-4 in place:
Rear end, 7cm wider than the 2009 SRT-10 Dodge Viper:
I have so much to talk about, to share with you... If you like the project, let me know, it could be the beginning of a long talk. I will need your help for engine mod soon !!!
took the words right out of my mouth. only cool miata out there, lol
__________________ 1999 NBM Z28 408ci, M6, MWC 9", 3.89's, 244/250 111+3 Custom hood and spoiler...Everything but good heads.. 13mpg 1964 Chevelle SS Vert, 572ci, 5sp, 9" locker w/ 3.89s. Truck arm suspension, Custom everything. 8mpg 1997 Kawasaki Vulcan 750 - 60mpg ------ 10/26/06 RIP John Seaton - Best friend and a great car guy
__________________ OLD Motor 11.46@116.6 1.57 60ft N/A CAM ONLY-BOLT ONS NEW Motor 11.60@115.9 1.56 60ft N/A CAM ONLY-BOLT ONS GearHeadRacing http://youtube.com/user/HavokDos
that exhaust on the side looks hideous... but rest of it looks and sounds cool
it looks like a side skirt would cover it up...the front is way lower than the side and it looks like theres a piece missing in front of the rear wheel...probably just did it that way for the picture to show the custom setup
__________________
1998 A4 Z28 Hardtop...Click Below for my Fquick (under construction) Coated Long Tube Headers, Catted Y Pipe, 373 Gears, HP Tuners, SLP Loudmouth Catback, Fast Toys Ram Air Kit, SLP Smooth Bellow, High Flow Lid, KYB AGX Shocks, CME
__________________ ******3 TEXT LINES (BLANK LINES ALSO COUNT) IS THE MAX WITH SIG PIC!!!!!! -Admin******
God gave up His son!!
been a member since 2005...
they cant stop me even if they stopped me.
it looks like a side skirt would cover it up...the front is way lower than the side and it looks like theres a piece missing in front of the rear wheel...probably just did it that way for the picture to show the custom setup
I figured the same but I had to let them know it needed to be covered
__________________ 2010 Camaro SS Edelbrock Supercharger, Kooks Longtubes, Kooks Mufflers, still looking over the car more to add soon....
i always thought the skinner tire on the wider rim was for lowering purposes; like if the fender well come down that far the angle created by the skinner tire would clear the fender.
maybe i'm wrong.
__________________ Tits or tires; it's going to cost you.
First, 7cm means 7 centimeters, like about 3 inches wider than the 2009 Viper I meant...
Second: The tire have been put there very fast, thay are wrong side I see yea,,, There will be Falken AZENIS sponsored tires from Fast (to be confirmed) and there will be 275/35/18 in the front and 315/30/18 rear.
Third: The side pipes will be covered, we just did no finished this part !
And finally, thank you for all these comments ! I'm sorry I did not reply faster but I did not have email to say I have comments, I will try to fix this !
I'm going to see the car tomorow and will post you some more pictures and videos !
Thanks again buddies !!!
LS6 Wide body Monster Miata 
!!!
Very nice
