s10-den

I dont know where to put this,but does anyone have about 10 pins they want to sell that are not used?I need the ones that connect on the wire and then plugs into the computer.Part # 1208492.I called the local "stealership" and the bastards wanted $4.75 for (((1))) little piece.You can get a bag of 100 for $40, but I'll never use them.No wonder gm is going bankrupt !!!!!!!!!!!

NoClassic

iTrader: (42)

http://www.lsxtune.com/shop/index.ph...nfdtlulnoida00

They will have what you need.

s10-den

Thanx.....

Pocket

iTrader: (22)

http://www.eficonnection.com/eficonnection/100w.aspx

Cheapest Ive found

If you are just after short lengths of wire with the connector then go to a JY and get any mid-late 90's GM ECM harness

3.8 (most), vortec, LT1, LSx truck all use the same terminals

s10-den

No I am re-building my harness and just need about 10 or so of these connectors...(new ones)
EDIT:::::Now that just throws a monkey wrench into the game,2 different sizes!?
I need them for a 02 s10 computer......

Pocket

iTrader: (22)

Gauge out the wire and buy accordingly

Also, where can you get a bag of 100?

LS1MCSS

iTrader: (18)

If they are the same size as an f-body computer, I have a lot of slightly used ones I'll send you, for free. You can solder and heat shrink your wires to them.

s10-den

Hey, if they are usable, I would like to have about 10 or so??