98/99+engine and body harness
#1
11 Second Club
Thread Starter
iTrader: (20)
Join Date: Aug 2006
Location: Oviedo,Fl/Fairbanks,AK
Posts: 889
Likes: 0
Received 0 Likes
on
0 Posts
98/99+engine and body harness
I'm piecing together parts to do a LS1 swap into my 95 Formula. I have a donor 98 car that has the complete body harness but no engine harness. Can i swap the body harness from the 98z into my car and use a 99+ engine harness and PCM?? I wanna just swap the entire harness over instead of cutting and splicing wires to make things easier. Is this possible??
Thanks in advance.
Thanks in advance.
#3
11 Second Club
iTrader: (88)
You really don't need to swap in the body Harness man..just re-pin the Engine Harness and you are good..it's not that much work and takes less time.
I would look for a 2002 PCM and any 1999-2002 Harness and tweak it to what you need. You are going to need a 1998 LS1 Temp Sensor and 3-wire Connector like the one on the TPS to make the Temp Gaige work if you are using a 1999-up Harness.
I would look for a 2002 PCM and any 1999-2002 Harness and tweak it to what you need. You are going to need a 1998 LS1 Temp Sensor and 3-wire Connector like the one on the TPS to make the Temp Gaige work if you are using a 1999-up Harness.
#4
11 Second Club
Thread Starter
iTrader: (20)
Join Date: Aug 2006
Location: Oviedo,Fl/Fairbanks,AK
Posts: 889
Likes: 0
Received 0 Likes
on
0 Posts
You really don't need to swap in the body Harness man..just re-pin the Engine Harness and you are good..it's not that much work and takes less time.
I would look for a 2002 PCM and any 1999-2002 Harness and tweak it to what you need. You are going to need a 1998 LS1 Temp Sensor and 3-wire Connector like the one on the TPS to make the Temp Gaige work if you are using a 1999-up Harness.
I would look for a 2002 PCM and any 1999-2002 Harness and tweak it to what you need. You are going to need a 1998 LS1 Temp Sensor and 3-wire Connector like the one on the TPS to make the Temp Gaige work if you are using a 1999-up Harness.