temp sender sits back in the adaptor
#1
Staging Lane
Thread Starter
Join Date: Apr 2009
Location: Long Beach Ca
Posts: 76
Likes: 0
Received 0 Likes
on
0 Posts
temp sender sits back in the adaptor
I got the adaptor in the link bellow to adapt my temp sender to 12mm for the hole on the back of the pass head. I am using a regular 1/8" npt electric sender.
http://www.summitracing.com/parts/ATM-2277/
the through hole was too small so I had to drill it out some, now the sender fits in but it sits a little over a 1/4" back when when tightened. pic bellow
will this give accurate readings even though the tip of the sender will not be directly in the waster stream? what have other done with this adapter?
http://www.summitracing.com/parts/ATM-2277/
the through hole was too small so I had to drill it out some, now the sender fits in but it sits a little over a 1/4" back when when tightened. pic bellow
will this give accurate readings even though the tip of the sender will not be directly in the waster stream? what have other done with this adapter?