Lil'John

Title almost states it. But to be very specific.

I've got an LQ4 that I've swapped into an old Land Cruiser. I bought the factory nipple but it is HUGE. It is 5/8".

The nipple on my land cruiser brake booster is closer to 3/8".

I'm trying to make a clean install. So I'd rather not have a bunch of barbed fittings and hose clamps.

So the question is: Does someone make a replacement nipple for the back of the LQ4 in a different barb size?

Pocket

iTrader: (22)

Swap the nipple on the booster to one from a truck

Lil'John

Not sure if a Chevy truck one will work on a Toyota booster It would certainly make life easier if it did though.

Pocket

iTrader: (22)

Drill can make any hole bigger

82swbLQ9

the nipple on the back of the truck intake is 3/8. hooked right into my 82's booster nipple. the intake was off of an 03 or 04

Lil'John

I put a caliper to my nipple and it came up at .5". Then it has a "huge" barb.

I haven't tried a 1/2" hose but plan on it.